Two-storey wraparound extensions in Canford Heath

Before you start in Canford Heath, here's what applies.

Postcode districts: BH11 and BH17
County / area: Dorset, England
Price region: South West England
Guide price: £124,000–£170,000 (£2,210–£3,040 per m²)
Approval route: Planning permission is needed: the side part takes it outside permitted development in England.
Nearest towns: Broadstone (1.2 miles), Parkstone (1.8 miles), Wimborne Minster (2.3 miles)
Distance to Bournemouth: about 4.4 miles
First visit: Free, no obligation

About a two-storey wraparound extension

A two-storey wraparound extension is an L-shaped addition that extends both the side and the rear of your house, on two floors. It gives one of the largest gains in floor space of any extension, typically a big open-plan kitchen and living area below and two or more bedrooms or bathrooms above. In England it needs planning permission, because the side part is more than one storey.

Canford Heath sits about 4.4 miles from Bournemouth. Closer to home, Broadstone is 1.2 miles away and Parkstone 1.8 miles.

What it costs in Canford Heath

Guide prices for two-storey wraparound extensions in South West England are around £2,210–£3,040 per m² of new floor space, including VAT. For a typical project with an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space), that's roughly £124,000–£170,000. Steelwork for wide openings is the item most likely to move the figure; we'll know once the engineer has designed it.

Spec	Per m²	An L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space)
Essential	£2,040–£2,800 per m²	£114,000–£156,500
Standard	£2,210–£3,040 per m²	£124,000–£170,000
Premium	£2,660–£3,650 per m²	£149,000–£204,000

Planning and building regulations in Canford Heath

In England, a two-storey wraparound extension needs householder planning permission, because any extension beyond a side wall must be single storey to be permitted development. The application costs £548 (or £575 for applications made from 8 December 2026). Councils weigh the side part against the street scene and the rear part against neighbours' light and outlook, and should decide within 8 weeks of validation.

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Canford Heath homes

Phasing the build

A wraparound touches two sides of the house at once, so the kitchen and often the rear rooms are out of use for part of the build. We plan the sequence so you keep a working kitchen and bathroom for as long as possible, or advise when moving out briefly makes sense.

The corner post

At the outside corner of the L, there is no existing wall to carry the floor above. Opening the ground floor fully usually means a steel frame or a corner post, and the engineer's design sets how slim it can be. We decide early whether you want a clear corner or a visible post.

How we'd run your project

Free site visit
We visit your home in Canford Heath, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Get it approved
Once you're happy with the design we submit it to the council for Canford Heath and deal with any questions from the planning officer.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.

Questions about two-storey wraparound extensions in Canford Heath

Who handles building regulations for a project in Canford Heath?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How long does a two-storey wraparound extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which postcodes do you cover around Canford Heath?

We cover Canford Heath (BH11 and BH17) and nearby places including Broadstone, Parkstone and Wimborne Minster, plus the rest of Dorset. The first site visit is free.

Is a wraparound extension better than separate side and rear extensions?

Building both at once usually costs less than two separate projects, because you pay for one set-up, one scaffold, one roof junction and one set of approvals. It also lets the layout be designed as a whole. The trade-off is a larger single outlay and a longer build, often 16 to 24 weeks at this size.

Does a wraparound extension need steel?

Almost always. Opening the corner of the house and the old rear wall to make one open-plan space means steel beams, and often a steel post or frame at the outside corner. The structural engineer sizes these, and the steel is ordered once the design is fixed, which is one reason a wraparound needs careful sequencing.

Nearby

We also cover places near Canford Heath, including:

Other extensions in Canford Heath

All two-storey extension services in Canford Heath · Two-storey wraparound extensions across Dorset

The quickest next step is a visit. We'll look at your house in Canford Heath and give you an honest view of the options.