Two-storey wraparound extensions in Cove

What we'd confirm first for a project in Cove.

Postcode districts: AB12
County / area: Aberdeen and Aberdeenshire, Scotland
Price region: Scotland
Guide price: £113,000–£155,500 (£2,020–£2,770 per m²)
Approval route: Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
Nearest towns: Nigg (1.2 miles), Portlethen (2.8 miles), Aberdeen (3.1 miles)
Distance to Aberdeen: about 3.1 miles
First visit: Free, no obligation

About a two-storey wraparound extension

A two-storey wraparound extension is an L-shaped addition that extends both the side and the rear of your house, on two floors. It gives one of the largest gains in floor space of any extension, typically a big open-plan kitchen and living area below and two or more bedrooms or bathrooms above.

We cover Cove (AB12) and the places around it, including Nigg (1.2 miles), Portlethen (2.8 miles) and Aberdeen.

What it costs in Cove

In Scotland, which includes Cove, we'd expect a two-storey wraparound extension to cost around £113,000–£155,500 for an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space), or £2,020–£2,770 per m² including VAT. Design fees, structural calculations and approval fees are separate and listed on our prices page.

Spec	Per m²	An L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space)
Essential	£1,860–£2,550 per m²	£104,000–£143,000
Standard	£2,020–£2,770 per m²	£113,000–£155,500
Premium	£2,430–£3,330 per m²	£136,000–£186,500

Planning and building standards in Cove

In Scotland, a two-storey wraparound would need to be at least 10 m from every boundary to be permitted development under Class 1B, and not on an elevation fronting a road. That is rarely possible, so plan for a householder planning application, which costs £371 and is decided within two months, followed by a building warrant before work starts.

Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.

Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.

Design points for Cove homes

The corner post

At the outside corner of the L, there is no existing wall to carry the floor above. Opening the ground floor fully usually means a steel frame or a corner post, and the engineer's design sets how slim it can be. We decide early whether you want a clear corner or a visible post.

Two roofs that meet

A wraparound needs the side roof and rear roof to join cleanly, often with a valley or hip where they meet. Getting pitches and ridge heights right keeps rainwater moving and avoids a bulky mass at the back corner, which neighbours and planners notice.

How we'd run your project

Look at the house
We start in Cove with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Technical design
We prepare the building warrant drawings, structural calculations and specification so the build price can be fixed.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about two-storey wraparound extensions in Cove

Which postcodes do you cover around Cove?

We cover Cove (AB12) and nearby places including Nigg, Portlethen and Aberdeen, plus the rest of Aberdeen and Aberdeenshire. The first site visit is free.

Who handles building standards for a project in Cove?

We handle it as part of the project. What's needed in Scotland: a building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How long does a two-storey wraparound extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils have two months to decide a local planning application), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Can a wraparound extension be part single, part two-storey?

Yes. Many wraparounds keep the rear part single storey with roof lights over the kitchen and put the two-storey part to the side. This can reduce the effect on neighbours and the cost. We set out both options at the design stage, so you can compare floor space against price before choosing.

Does a wraparound extension need steel?

Almost always. Opening the corner of the house and the old rear wall to make one open-plan space means steel beams, and often a steel post or frame at the outside corner. The structural engineer sizes these, and the steel is ordered once the design is fixed, which is one reason a wraparound needs careful sequencing.

Nearby

We also cover places near Cove, including:

Other extensions in Cove

All two-storey extension services in Cove · Two-storey wraparound extensions across Aberdeen and Aberdeenshire

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.