Two-storey wraparound extensions in Gloucestershire

Gloucestershire at a glance

Nation: England
Price region: South West England
Postcode areas: BS, GL
Towns covered: 15 listed below, plus surrounding villages
Approval route: Planning permission is needed: the side part takes it outside permitted development in England.
Site visits: Free, no obligation

What a two-storey wraparound extension involves

A two-storey wraparound extension suits a house with space both beside it and behind it, where you want to transform the layout rather than add a single room. You get one design for the whole L-shape, the planning application, structural design for the corner and the openings into the house, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

Gloucestershire towns we list: Gloucester (GL1), Cheltenham (GL50), Stroud (GL5), Kingswood (BS15), Mangotsfield (BS16) and Yate (BS37). Every other address in Gloucestershire is covered as well.

Guide price in South West England

Expect a two-storey wraparound extension in Gloucestershire to land somewhere around £124,000–£170,000 for an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space). Our South West England guide rate is £2,210–£3,040 per m², including VAT. Kitchens, bathroom fittings and flooring are priced separately so you can compare like with like.

Spec	Per m²	Typical project
Essential	£2,040–£2,800 per m²	£114,000–£156,500
Standard	£2,210–£3,040 per m²	£124,000–£170,000
Premium	£2,660–£3,650 per m²	£149,000–£204,000

Rules in England

In England, a two-storey wraparound extension needs householder planning permission, because any extension beyond a side wall must be single storey to be permitted development. The application costs £548 (or £575 for applications made from 8 December 2026). Councils weigh the side part against the street scene and the rear part against neighbours' light and outlook, and should decide within 8 weeks of validation.

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

The Party Wall etc. Act 1996 applies, so notices may be needed for work on or near a shared wall or boundary.

Getting the design right

Two roofs that meet

A wraparound needs the side roof and rear roof to join cleanly, often with a valley or hip where they meet. Getting pitches and ridge heights right keeps rainwater moving and avoids a bulky mass at the back corner, which neighbours and planners notice.

Phasing the build

A wraparound touches two sides of the house at once, so the kitchen and often the rear rooms are out of use for part of the build. We plan the sequence so you keep a working kitchen and bathroom for as long as possible, or advise when moving out briefly makes sense.

How we work in Gloucestershire

Look at the house
We start in Gloucestershire with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Engineer it
Foundations sized for two floors, steels for any openings, and building control approval, all before anyone starts on site.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Towns we cover in Gloucestershire

Two-storey wraparound extensions in Gloucestershire: questions

How much does a two-storey wraparound extension cost in Gloucestershire?

In South West England our guide is £2,210–£3,040 per m² including VAT, so about £124,000–£170,000 for an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space). Essential and Premium specs move that by roughly 8% down or 20% up.

How much floor space does a wraparound extension add?

It depends on the width of the side plot and the depth at the rear. Our guide prices are based on a typical wraparound with an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space). Yours may be larger or smaller, and the measured survey shows what your plot can take.

Can a wraparound extension be part single, part two-storey?

Yes. Many wraparounds keep the rear part single storey with roof lights over the kitchen and put the two-storey part to the side. This can reduce the effect on neighbours and the cost. We set out both options at the design stage, so you can compare floor space against price before choosing.

Does a wraparound extension need steel?

Almost always. Opening the corner of the house and the old rear wall to make one open-plan space means steel beams, and often a steel post or frame at the outside corner. The structural engineer sizes these, and the steel is ordered once the design is fixed, which is one reason a wraparound needs careful sequencing.

Will I need planning permission in Gloucestershire?

Gloucestershire is in England. Planning permission is needed: the side part takes it outside permitted development in England.

Neighbouring areas

All extension services in Gloucestershire · About two-storey wraparound extensions