Extra bedroom and en-suite extensions in Dartford

Before you start in Dartford, here's what applies.

Postcode districts: DA1 and DA2
County / area: Kent, England
Price region: South East England
Guide price: £61,500–£83,000 (£2,200–£2,970 per m²), plus £5,500–£11,000 for the en-suite
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Bexley (2.8 miles), Erith (3 miles), Swanley (3.8 miles)
Distance to Maidstone: about 18 miles
First visit: Free, no obligation

About an extra bedroom and en-suite extension

This service suits you if you need another bedroom, or want a main bedroom with its own bathroom, without converting the loft or moving. You get a first-floor layout that connects well to your landing, an en-suite designed for plumbing and ventilation, a useful room downstairs, the approvals your nation needs and the build, managed by us and carried out by vetted teams working under S&K.

Around Dartford we also work in Bexley, Erith and Swanley, and across the rest of Kent. Postcode districts in and near Dartford: DA1 and DA2.

What it costs in Dartford

In South East England, which includes Dartford, we'd expect an extra bedroom and en-suite extension to cost around £61,500–£83,000 (plus £5,500–£11,000 for the en-suite) for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space), or £2,200–£2,970 per m² including VAT. Design fees, structural calculations and approval fees are separate and listed on our prices page.

Spec	Per m²	A 4 m × 3.5 m footprint on two floors (28 m² of new floor space)
Essential	£2,020–£2,730 per m²	£56,500–£76,500
Standard	£2,200–£2,970 per m²	£61,500–£83,000
Premium	£2,640–£3,560 per m²	£74,000–£100,000

Planning and building regulations in Dartford

In England, an extra bedroom extension at the rear can be permitted development if it goes no more than 3 m beyond the original rear wall and stays 7 m from the rear boundary. Upper side windows, including en-suite windows, must be obscure-glazed and non-opening below 1.7 m. Side or deeper designs need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Dartford homes

Connecting to the landing

The new bedroom must be reached from the existing landing, usually through a new opening in the outside wall or by taking part of an existing bedroom as a corridor. We look at the stairs and landing first, because a poor connection can waste much of the new space.

Escape window and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and high, and the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs. We design the windows to meet this.

How we'd run your project

Start at your house
We come to your home in Dartford, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build
Foundations, walls, floor, roof, windows, then first and second fix. We break through into the house as late as we can.

Questions about extra bedroom and en-suite extensions in Dartford

How much does an extra bedroom and en-suite extension cost in Dartford?

Our guide for South East England, which covers Dartford, is £2,200–£2,970 per m² including VAT. A typical project with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £61,500–£83,000 (plus £5,500–£11,000 for the en-suite). Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Who handles building regulations for a project in Dartford?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Dartford?

We cover Dartford (DA1 and DA2) and nearby places including Bexley, Erith and Swanley, plus the rest of Kent. The first site visit is free.

Can an en-suite go in a room with no window?

Yes. A shower room without a window is allowed, provided it has a mechanical extract fan to the outside that meets Part F. Many people prefer a window for daylight, but if it faces a neighbour it will usually need obscure glass. We plan the extract route early so the duct is hidden.

What goes on the ground floor below a new bedroom?

Whatever suits you: a bigger kitchen, a family room, a study, a utility or a downstairs shower room. The ground floor usually costs about the same whatever it is used for, apart from kitchen units and bathroom fittings, which are priced separately.

Nearby

Nearby towns we cover for extra bedroom and en-suite extensions:

Other extensions in Dartford

All two-storey extension services in Dartford · Extra bedroom and en-suite extensions across Kent

Want a figure first? Try our guide price tool, then book a free visit to firm it up.