Kent · England

Extra bedroom and en-suite extensions in Kent

From first sketch to completion certificate, we deliver extra bedroom and en-suite extensions for homeowners across Kent.

Kent at a glance

Nation
England
Price region
South East England
Postcode areas
BR, CT, DA, ME, TN
Towns covered
31 listed below, plus surrounding villages
Approval route
It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Site visits
Free, no obligation

What an extra bedroom and en-suite extension involves

An extra bedroom and en-suite extension is a two-storey extension planned around a new double bedroom with its own shower room on the first floor, with a ground-floor room below. It is one of the most effective ways to add space for a growing family. Nationwide's 2025 research linked adding a double bedroom and bathroom to a three-bed, one-bathroom house with value gains of up to 24%.

Towns in Kent include Maidstone (ME14), Gillingham (ME3), Chatham (ME4), Tunbridge Wells (TN1), Folkestone (CT18) and Margate (CT9). If yours isn't listed, we still cover it.

Guide price in South East England

Expect an extra bedroom and en-suite extension in Kent to land somewhere around £61,500–£83,000 (plus £5,500–£11,000 for the en-suite) for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). Our South East England guide rate is £2,200–£2,970 per m², including VAT. We'll give you a written design-stage price first, then a fixed build price once the drawings are agreed.

SpecPer m²Typical project
Essential£2,020–£2,730 per m²£56,500–£76,500
Standard£2,200–£2,970 per m²£61,500–£83,000
Premium£2,640–£3,560 per m²£74,000–£100,000

Rules in England

In England, an extra bedroom extension at the rear can be permitted development if it goes no more than 3 m beyond the original rear wall and stays 7 m from the rear boundary. Upper side windows, including en-suite windows, must be obscure-glazed and non-opening below 1.7 m. Side or deeper designs need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

The Party Wall etc. Act 1996 applies, so notices may be needed for work on or near a shared wall or boundary.

Getting the design right

Connecting to the landing

The new bedroom must be reached from the existing landing, usually through a new opening in the outside wall or by taking part of an existing bedroom as a corridor. We look at the stairs and landing first, because a poor connection can waste much of the new space.

Escape window and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and high, and the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs. We design the windows to meet this.

How we work in Kent

  1. Look at the house

    We start in Kent with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.

  2. Drawings and permission

    Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Kent.

  3. Fixed price in writing

    With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.

  4. Build and sign-off

    Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.

Towns we cover in Kent

Extra bedroom and en-suite extensions in Kent: questions

How much does an extra bedroom and en-suite extension cost in Kent?

In South East England our guide is £2,200–£2,970 per m² including VAT, so about £61,500–£83,000 (plus £5,500–£11,000 for the en-suite) for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). Essential and Premium specs move that by roughly 8% down or 20% up.

How big should a new double bedroom be?

There is no legal minimum size for a bedroom in a house you own, so the test is whether it works. A comfortable double needs room for the bed with space to walk round it, wardrobes and a door that opens freely. We draw furniture on the plans so you can judge the space before anything is built.

Can an en-suite go in a room with no window?

Yes. A shower room without a window is allowed, provided it has a mechanical extract fan to the outside that meets Part F. Many people prefer a window for daylight, but if it faces a neighbour it will usually need obscure glass. We plan the extract route early so the duct is hidden.

Does an extra bedroom add value to my house?

It usually does, though not always by the full cost. Nationwide's 2025 research found that adding a double bedroom to a two-bed house was linked to about 13% higher value, and a double bedroom and bathroom on a three-bed, one-bathroom house up to 24%. Local ceiling prices still apply.

Will I need planning permission in Kent?

Kent is in England. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.

Neighbouring areas

All extension services in Kent · About extra bedroom and en-suite extensions

Ready to see what a second storey could do for your home?

Book a free site visit. We'll look at your house, talk through options and explain the approvals you'd need, then price the design stage in writing.

CallGuide price