Extra bedroom and en-suite extensions in Gillingham
Our extra bedroom and en-suite extensions service in Gillingham covers everything: measured survey, design, planning or permitted development checks, structural design, building control and the build itself.
Before you start in Gillingham, here's what applies.
- Postcode districts
- ME3, ME7 and ME8
- County / area
- Kent, England
- Price region
- South East England
- Guide price
- £61,500–£83,000 (£2,200–£2,970 per m²), plus £5,500–£11,000 for the en-suite
- Approval route
- It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
- Nearest towns
- Chatham (1.1 miles), Rochester (1.9 miles), Strood (3.1 miles)
- Distance to Maidstone
- about 8.6 miles
- First visit
- Free, no obligation
About an extra bedroom and en-suite extension
An extra bedroom and en-suite extension is a two-storey extension planned around a new double bedroom with its own shower room on the first floor, with a ground-floor room below. It is one of the most effective ways to add space for a growing family. Nationwide's 2025 research linked adding a double bedroom and bathroom to a three-bed, one-bathroom house with value gains of up to 24%.
Gillingham sits about 8.6 miles from Maidstone. Closer to home, Chatham is 1.1 miles away and Rochester 1.9 miles.
What it costs in Gillingham
Guide prices for extra bedroom and en-suite extensions in South East England are around £2,200–£2,970 per m² of new floor space, including VAT. For a typical project with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space), that's roughly £61,500–£83,000 (plus £5,500–£11,000 for the en-suite). Design fees, structural calculations and approval fees are separate and listed on our prices page.
| Spec | Per m² | A 4 m × 3.5 m footprint on two floors (28 m² of new floor space) |
|---|---|---|
| Essential | £2,020–£2,730 per m² | £56,500–£76,500 |
| Standard | £2,200–£2,970 per m² | £61,500–£83,000 |
| Premium | £2,640–£3,560 per m² | £74,000–£100,000 |
Planning and building regulations in Gillingham
In England, an extra bedroom extension at the rear can be permitted development if it goes no more than 3 m beyond the original rear wall and stays 7 m from the rear boundary. Upper side windows, including en-suite windows, must be obscure-glazed and non-opening below 1.7 m. Side or deeper designs need planning permission, costing £548 (or £575 for applications made from 8 December 2026).
Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.
Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.
Design points for Gillingham homes
Escape window and fire safety
A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and high, and the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs. We design the windows to meet this.
Connecting to the landing
The new bedroom must be reached from the existing landing, usually through a new opening in the outside wall or by taking part of an existing bedroom as a corridor. We look at the stairs and landing first, because a poor connection can waste much of the new space.
How we'd run your project
Measure and listen
A visit to Gillingham to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.
Questions about extra bedroom and en-suite extensions in Gillingham
How long does an extra bedroom and en-suite extension take?
Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.
How much does an extra bedroom and en-suite extension cost in Gillingham?
Our guide for South East England, which covers Gillingham, is £2,200–£2,970 per m² including VAT. A typical project with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £61,500–£83,000 (plus £5,500–£11,000 for the en-suite). Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
Which postcodes do you cover around Gillingham?
We cover Gillingham (ME3, ME7 and ME8) and nearby places including Chatham, Rochester and Strood, plus the rest of Kent. The first site visit is free.
Can an en-suite go in a room with no window?
Yes. A shower room without a window is allowed, provided it has a mechanical extract fan to the outside that meets Part F. Many people prefer a window for daylight, but if it faces a neighbour it will usually need obscure glass. We plan the extract route early so the duct is hidden.
What goes on the ground floor below a new bedroom?
Whatever suits you: a bigger kitchen, a family room, a study, a utility or a downstairs shower room. The ground floor usually costs about the same whatever it is used for, apart from kitchen units and bathroom fittings, which are priced separately.
Nearby
Close to Gillingham? We work across the area, including:
Other extensions in Gillingham
All two-storey extension services in Gillingham · Extra bedroom and en-suite extensions across Kent
Book a free site visit in Gillingham and we'll tell you what's possible, what approvals you need and what the design stage would cost.