Essex · England

Extra bedroom and en-suite extensions in Essex

If you're in Essex and weighing up an extra bedroom and en-suite extension, start here: guide costs for the East of England, the approvals you'll need and how we work.

Essex at a glance

Nation
England
Price region
East of England
Postcode areas
CB, CM, CO, EN, IG, RM, SS
Towns covered
34 listed below, plus surrounding villages
Approval route
It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Site visits
Free, no obligation

What an extra bedroom and en-suite extension involves

An extra bedroom and en-suite extension is a two-storey extension planned around a new double bedroom with its own shower room on the first floor, with a ground-floor room below. It is one of the most effective ways to add space for a growing family. Nationwide's 2025 research linked adding a double bedroom and bathroom to a three-bed, one-bathroom house with value gains of up to 24%.

Essex towns we list: Southend-on-Sea (SS0), Basildon (SS14), Colchester (CO1), Chelmsford (CM1), Harlow (CM17) and Grays (RM17). Every other address in Essex is covered as well.

Guide price in the East of England

Most of the cost of an extra bedroom and en-suite extension is set by its size and specification. For Essex and the rest of the East of England, our guide is £2,060–£2,780 per m² including VAT, so about £57,500–£78,000 (plus £5,500–£11,000 for the en-suite) for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). Professional fees for drawings and the structural engineer are listed separately on our prices page.

SpecPer m²Typical project
Essential£1,900–£2,560 per m²£53,000–£71,500
Standard£2,060–£2,780 per m²£57,500–£78,000
Premium£2,470–£3,340 per m²£69,000–£93,500

Rules in England

In England, an extra bedroom extension at the rear can be permitted development if it goes no more than 3 m beyond the original rear wall and stays 7 m from the rear boundary. Upper side windows, including en-suite windows, must be obscure-glazed and non-opening below 1.7 m. Side or deeper designs need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

The Party Wall etc. Act 1996 applies, so notices may be needed for work on or near a shared wall or boundary.

Getting the design right

Escape window and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and high, and the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs. We design the windows to meet this.

Planning the en-suite

An en-suite needs a route for the soil pipe to the drains, enough fall for waste water and an extract fan to the outside under Part F. Placing it over the ground-floor utility or near an existing drain keeps pipework short and hidden.

How we work in Essex

  1. Understand the brief

    At your home in Essex we agree what you need: bedroom count, bathroom, kitchen space, and how much garden you want to keep.

  2. Choose the approval route

    Some designs fit permitted development, most need a householder application. We decide which applies in England before drawing in detail.

  3. Price it properly

    Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.

  4. Build

    Foundations, walls, floor, roof, windows, then first and second fix. We break through into the house as late as we can.

Towns we cover in Essex

Extra bedroom and en-suite extensions in Essex: questions

How much does an extra bedroom and en-suite extension cost in Essex?

In the East of England our guide is £2,060–£2,780 per m² including VAT, so about £57,500–£78,000 (plus £5,500–£11,000 for the en-suite) for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). Essential and Premium specs move that by roughly 8% down or 20% up.

Does an extra bedroom add value to my house?

It usually does, though not always by the full cost. Nationwide's 2025 research found that adding a double bedroom to a two-bed house was linked to about 13% higher value, and a double bedroom and bathroom on a three-bed, one-bathroom house up to 24%. Local ceiling prices still apply.

What goes on the ground floor below a new bedroom?

Whatever suits you: a bigger kitchen, a family room, a study, a utility or a downstairs shower room. The ground floor usually costs about the same whatever it is used for, apart from kitchen units and bathroom fittings, which are priced separately.

Can an en-suite go in a room with no window?

Yes. A shower room without a window is allowed, provided it has a mechanical extract fan to the outside that meets Part F. Many people prefer a window for daylight, but if it faces a neighbour it will usually need obscure glass. We plan the extract route early so the duct is hidden.

Will I need planning permission in Essex?

Essex is in England. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.

Neighbouring areas

All extension services in Essex · About extra bedroom and en-suite extensions

Ready to see what a second storey could do for your home?

Book a free site visit. We'll look at your house, talk through options and explain the approvals you'd need, then price the design stage in writing.

CallGuide price