Extra bedroom and en-suite extensions in Mold
For an extra bedroom and en-suite extension in Mold, the first questions are always the same: how big, which approvals, and what it will cost. This page answers all three for Clwyd.
What we'd confirm first for a project in Mold.
- Postcode districts
- CH7
- County / area
- Clwyd, Wales
- Price region
- Wales
- Guide price
- £51,500–£69,500 (£1,840–£2,480 per m²), plus £5,500–£11,000 for the en-suite
- Approval route
- It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
- Nearest towns
- Buckley (2.4 miles), Deeside (4.9 miles), Hawarden (4.9 miles)
- Distance to Wrexham
- about 10.4 miles
- First visit
- Free, no obligation
About an extra bedroom and en-suite extension
An extra bedroom and en-suite extension is a two-storey extension planned around a new double bedroom with its own shower room on the first floor, with a ground-floor room below. It is one of the most effective ways to add space for a growing family. Nationwide's 2025 research linked adding a double bedroom and bathroom to a three-bed, one-bathroom house with value gains of up to 24%.
We cover Mold (CH7) and the places around it, including Buckley (2.4 miles), Deeside (4.9 miles) and Hawarden.
What it costs in Mold
For budgeting in Mold, allow around £51,500–£69,500 (plus £5,500–£11,000 for the en-suite) for an extra bedroom and en-suite extension with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). That's based on £1,840–£2,480 per m² including VAT for Wales. Keep a contingency of around 10% for things nobody can see until the ground is opened up.
| Spec | Per m² | A 4 m × 3.5 m footprint on two floors (28 m² of new floor space) |
|---|---|---|
| Essential | £1,690–£2,290 per m² | £47,500–£64,000 |
| Standard | £1,840–£2,480 per m² | £51,500–£69,500 |
| Premium | £2,210–£2,980 per m² | £62,000–£83,500 |
Planning and building regulations in Mold
In Wales, an extra bedroom at the rear can be permitted development if the first floor goes no more than 3 m beyond the original rear wall and stays 10.5 m from the rear boundary. A two-storey side extension can also qualify if it is 10.5 m from the side boundary, set back 1 m and adds no more than 50% width. Otherwise the fee is £585.
Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.
Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).
Design points for Mold homes
Sound and privacy
Bedrooms above a kitchen or family room benefit from an insulated floor to reduce noise. Side-facing upstairs windows usually have to be obscure-glazed, so we place the main bedroom window to the rear and the en-suite window to the side where possible.
Connecting to the landing
The new bedroom must be reached from the existing landing, usually through a new opening in the outside wall or by taking part of an existing bedroom as a corridor. We look at the stairs and landing first, because a poor connection can waste much of the new space.
How we'd run your project
Start at your house
We come to your home in Mold, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in Wales before drawing in detail.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.
Questions about extra bedroom and en-suite extensions in Mold
How long does an extra bedroom and en-suite extension take?
Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.
Do I need planning permission for an extra bedroom and en-suite extension in Mold?
Mold is in Wales, so Wales planning rules apply. It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.
Which postcodes do you cover around Mold?
We cover Mold (CH7) and nearby places including Buckley, Deeside and Hawarden, plus the rest of Clwyd. The first site visit is free.
Can an en-suite go in a room with no window?
Yes. A shower room without a window is allowed, provided it has a mechanical extract fan to the outside that meets Part F. Many people prefer a window for daylight, but if it faces a neighbour it will usually need obscure glass. We plan the extract route early so the duct is hidden.
Does an extra bedroom add value to my house?
It usually does, though not always by the full cost. Nationwide's 2025 research found that adding a double bedroom to a two-bed house was linked to about 13% higher value, and a double bedroom and bathroom on a three-bed, one-bathroom house up to 24%. Local ceiling prices still apply.
Nearby
Other towns near Mold:
Other extensions in Mold
All two-storey extension services in Mold · Extra bedroom and en-suite extensions across Clwyd
Book a free site visit in Mold and we'll tell you what's possible, what approvals you need and what the design stage would cost.