First-floor extensions in Barkingside

What we'd confirm first for a project in Barkingside.

Postcode districts: IG2, IG4, IG5 and IG6
County / area: Greater London, England
Price region: London
Guide price: £30,000–£43,500 (£2,160–£3,120 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Ilford (1.6 miles), Wanstead (1.9 miles), Snaresbrook (2.1 miles)
First visit: Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

We cover postcode districts IG2, IG4, IG5 and IG6 in and around Barkingside, along with neighbouring Ilford, Wanstead and Snaresbrook.

What it costs in Barkingside

Using our London rates, a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £30,000–£43,500, including VAT. Bigger or more glazed designs cost more per m². Design fees, structural calculations and approval fees are separate and listed on our prices page.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,990–£2,870 per m²	£28,000–£40,000
Standard	£2,160–£3,120 per m²	£30,000–£43,500
Premium	£2,590–£3,740 per m²	£36,500–£52,500

Planning and building regulations in Barkingside

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Barkingside homes

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

How we'd run your project

Measure and listen
A visit to Barkingside to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Engineer it
Foundations sized for two floors, steels for any openings, and building control approval, all before anyone starts on site.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about first-floor extensions in Barkingside

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which postcodes do you cover around Barkingside?

We cover Barkingside (IG2, IG4, IG5 and IG6) and nearby places including Ilford, Wanstead and Snaresbrook, plus the rest of Greater London. The first site visit is free.

Who handles building regulations for a project in Barkingside?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

Close to Barkingside? We work across the area, including:

Other extensions in Barkingside

All two-storey extension services in Barkingside · First-floor extensions across Greater London

Tell us about your house in Barkingside and we'll call you back to arrange a free, no-obligation visit.