First-floor extensions in Bath
We plan and build first-floor extensions for homeowners in Bath and nearby. Every project starts with a free visit and a design stage priced in writing before any work begins.
What we'd confirm first for a project in Bath.
- Postcode districts
- BA1 and BA2
- County / area
- Somerset, England
- Price region
- South West England
- Guide price
- £26,000–£37,500 (£1,850–£2,680 per m²)
- Approval route
- It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
- Nearest towns
- Keynsham (6.5 miles), Neston (Wiltshire) (7.4 miles), Trowbridge (7.7 miles)
- First visit
- Free, no obligation
About a first-floor extension
A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.
Around Bath we also work in Keynsham, Neston (Wiltshire) and Trowbridge, and across the rest of Somerset. Postcode districts in and near Bath: BA1 and BA2.
What it costs in Bath
For budgeting in Bath, allow around £26,000–£37,500 for a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²). That's based on £1,850–£2,680 per m² including VAT for South West England. Professional fees for drawings and the structural engineer are listed separately on our prices page.
| Spec | Per m² | 4 m × 3.5 m of new first-floor space (14 m²) |
|---|---|---|
| Essential | £1,710–£2,460 per m² | £24,000–£34,500 |
| Standard | £1,850–£2,680 per m² | £26,000–£37,500 |
| Premium | £2,220–£3,210 per m² | £31,000–£45,000 |
Planning and building regulations in Bath
In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).
Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.
Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.
Design points for Bath homes
Can the existing structure take it?
Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.
Tying into the house
The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.
How we'd run your project
Look at the house
We start in Bath with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.
Questions about first-floor extensions in Bath
How much does a first-floor extension cost in Bath?
Our guide for South West England, which covers Bath, is £1,850–£2,680 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £26,000–£37,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
How long does a first-floor extension take?
Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.
Which postcodes do you cover around Bath?
We cover Bath (BA1 and BA2) and nearby places including Keynsham, Neston (Wiltshire) and Trowbridge, plus the rest of Somerset. The first site visit is free.
What happens to the room below while the first floor is built?
The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.
Can I build on top of my existing single-storey extension?
Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.
Nearby
Nearby towns we cover for first-floor extensions:
Other extensions in Bath
- Rear
- Side
- Wraparound
- Part two-storey
- Over a garage
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Bath · First-floor extensions across Somerset
Want a figure first? Try our guide price tool, then book a free visit to firm it up.