Part single, part two-storey extensions in Bath

Before you start in Bath, here's what applies.

Postcode districts: BA1 and BA2
County / area: Somerset, England
Price region: South West England
Guide price: £74,000–£102,000 (£2,060–£2,830 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Keynsham (6.5 miles), Neston (Wiltshire) (7.4 miles), Trowbridge (7.7 miles)
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.

We cover postcode districts BA1 and BA2 in and around Bath, along with neighbouring Keynsham, Neston (Wiltshire) and Trowbridge.

What it costs in Bath

In South West England, which includes Bath, we'd expect a part single, part two-storey extension to cost around £74,000–£102,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total), or £2,060–£2,830 per m² including VAT. Professional fees for drawings and the structural engineer are listed separately on our prices page.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,900–£2,610 per m²	£68,000–£94,000
Standard	£2,060–£2,830 per m²	£74,000–£102,000
Premium	£2,470–£3,400 per m²	£89,000–£122,500

Planning and building regulations in Bath

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Bath homes

Where to put the two-storey part

The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

How we'd run your project

Visit and first ideas
One of our team visits your house in Bath, checks the walls, roof and drains, and sketches out options with you.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about part single, part two-storey extensions in Bath

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which postcodes do you cover around Bath?

We cover Bath (BA1 and BA2) and nearby places including Keynsham, Neston (Wiltshire) and Trowbridge, plus the rest of Somerset. The first site visit is free.

Do I need planning permission for a part single, part two-storey extension in Bath?

Bath is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Can I add roof lights to the single-storey part?

Yes. Roof lights or a lantern over the single-storey part are one of the main reasons to choose this design, as they light the middle of a deep kitchen. In England they count towards the Part L glazing allowance, normally 25% of the new floor area plus windows removed, so we balance them with the rear doors.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Nearby

We also cover places near Bath, including:

Other extensions in Bath

All two-storey extension services in Bath · Part single, part two-storey extensions across Somerset

Tell us about your house in Bath and we'll call you back to arrange a free, no-obligation visit.