Somerset · England

Part single, part two-storey extensions in Somerset

We design and build part single, part two-storey extensions across Somerset, from the larger towns to the villages in between. Every project starts with a free site visit.

Somerset at a glance

Nation
England
Price region
South West England
Postcode areas
BA, BS, TA
Towns covered
18 listed below, plus surrounding villages
Approval route
It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Site visits
Free, no obligation

What a part single, part two-storey extension involves

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

Towns in Somerset include Bath (BA1), Weston-super-Mare (BS22), Taunton (TA1), Yeovil (BA20), Bridgwater (TA5) and Portishead (BS20). If yours isn't listed, we still cover it.

Guide price in South West England

In South West England, which includes Somerset, we'd expect a part single, part two-storey extension to cost around £74,000–£102,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total), or £2,060–£2,830 per m² including VAT. Kitchens, bathroom fittings and flooring are priced separately so you can compare like with like.

SpecPer m²Typical project
Essential£1,900–£2,610 per m²£68,000–£94,000
Standard£2,060–£2,830 per m²£74,000–£102,000
Premium£2,470–£3,400 per m²£89,000–£122,500

Rules in England

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

The Party Wall etc. Act 1996 applies, so notices may be needed for work on or near a shared wall or boundary.

Getting the design right

Light into the kitchen

The single-storey part is the place for roof lights or a lantern, which bring daylight deep into the plan. In England, glazing is normally limited to 25% of the new floor area plus any windows removed, unless calculations show the house still performs, so we plan the balance early.

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

How we work in Somerset

  1. Visit and first ideas

    One of our team visits your house in Somerset, checks the walls, roof and drains, and sketches out options with you.

  2. Plans, then approval

    Measured survey, design, then the right approval route for your house. We explain each step before we take it.

  3. Price it properly

    Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.

  4. Build and sign-off

    Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.

Towns we cover in Somerset

Part single, part two-storey extensions in Somerset: questions

How much does a part single, part two-storey extension cost in Somerset?

In South West England our guide is £2,060–£2,830 per m² including VAT, so about £74,000–£102,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). Essential and Premium specs move that by roughly 8% down or 20% up.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Can I add roof lights to the single-storey part?

Yes. Roof lights or a lantern over the single-storey part are one of the main reasons to choose this design, as they light the middle of a deep kitchen. In England they count towards the Part L glazing allowance, normally 25% of the new floor area plus windows removed, so we balance them with the rear doors.

Will I need planning permission in Somerset?

Somerset is in England. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.

Neighbouring areas

All extension services in Somerset · About part single, part two-storey extensions

Ready to see what a second storey could do for your home?

Book a free site visit. We'll look at your house, talk through options and explain the approvals you'd need, then price the design stage in writing.

CallGuide price