Part single, part two-storey extensions in Bridgwater
Our part single, part two-storey extensions service in Bridgwater covers everything: measured survey, design, planning or permitted development checks, structural design, building control and the build itself.
Before you start in Bridgwater, here's what applies.
- Postcode districts
- TA5, TA6 and TA7
- County / area
- Somerset, England
- Price region
- South West England
- Guide price
- £74,000–£102,000 (£2,060–£2,830 per m²)
- Approval route
- It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
- Nearest towns
- Burnham-on-Sea (7.6 miles), Taunton (8.9 miles), Street (11.4 miles)
- Distance to Bath
- about 32.6 miles
- First visit
- Free, no obligation
About a part single, part two-storey extension
A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.
Bridgwater sits about 32.6 miles from Bath. Closer to home, Burnham-on-Sea is 7.6 miles away and Taunton 8.9 miles.
What it costs in Bridgwater
For budgeting in Bridgwater, allow around £74,000–£102,000 for a part single, part two-storey extension with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). That's based on £2,060–£2,830 per m² including VAT for South West England. The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.
| Spec | Per m² | A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) |
|---|---|---|
| Essential | £1,900–£2,610 per m² | £68,000–£94,000 |
| Standard | £2,060–£2,830 per m² | £74,000–£102,000 |
| Premium | £2,470–£3,400 per m² | £89,000–£122,500 |
Planning and building regulations in Bridgwater
In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).
Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.
Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.
Design points for Bridgwater homes
Structure at the step
The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.
Light into the kitchen
The single-storey part is the place for roof lights or a lantern, which bring daylight deep into the plan. In England, glazing is normally limited to 25% of the new floor area plus any windows removed, unless calculations show the house still performs, so we plan the balance early.
How we'd run your project
Understand the brief
At your home in Bridgwater we agree what you need: bedroom count, bathroom, kitchen space, and how much garden you want to keep.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Engineer it
Foundations sized for two floors, steels for any openings, and building control approval, all before anyone starts on site.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.
Questions about part single, part two-storey extensions in Bridgwater
Do I need planning permission for a part single, part two-storey extension in Bridgwater?
Bridgwater is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.
Who handles building regulations for a project in Bridgwater?
We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.
How long does a part single, part two-storey extension take?
Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.
Which side should the two-storey part go on?
Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.
Can the single-storey part be deeper than the two-storey part?
With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.
Nearby
The same service in neighbouring towns:
Other extensions in Bridgwater
- Rear
- Side
- Wraparound
- Over a garage
- First floor
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Bridgwater · Part single, part two-storey extensions across Somerset
Book a free site visit in Bridgwater and we'll tell you what's possible, what approvals you need and what the design stage would cost.