First-floor extensions in Bridgwater

Before you start in Bridgwater, here's what applies.

Postcode districts: TA5, TA6 and TA7
County / area: Somerset, England
Price region: South West England
Guide price: £26,000–£37,500 (£1,850–£2,680 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Burnham-on-Sea (7.6 miles), Taunton (8.9 miles), Street (11.4 miles)
Distance to Bath: about 32.6 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

Bridgwater sits about 32.6 miles from Bath. Closer to home, Burnham-on-Sea is 7.6 miles away and Taunton 8.9 miles.

What it costs in Bridgwater

Our guide for South West England is £1,850–£2,680 per m² including VAT. On a project with 4 m × 3.5 m of new first-floor space (14 m²), that puts a first-floor extension in Bridgwater at roughly £26,000–£37,500. Keep a contingency of around 10% for things nobody can see until the ground is opened up.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,710–£2,460 per m²	£24,000–£34,500
Standard	£1,850–£2,680 per m²	£26,000–£37,500
Premium	£2,220–£3,210 per m²	£31,000–£45,000

Planning and building regulations in Bridgwater

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Bridgwater homes

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

Matching the roofline

A first-floor extension often changes how the back or side of the house looks more than the original single storey did. Matching the main roof pitch and materials, and keeping the ridge below the main ridge, usually gives the best result and is expected for permitted development in England.

How we'd run your project

Start at your house
We come to your home in Bridgwater, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about first-floor extensions in Bridgwater

How much does a first-floor extension cost in Bridgwater?

Our guide for South West England, which covers Bridgwater, is £1,850–£2,680 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £26,000–£37,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which postcodes do you cover around Bridgwater?

We cover Bridgwater (TA5, TA6 and TA7) and nearby places including Burnham-on-Sea, Taunton and Street, plus the rest of Somerset. The first site visit is free.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

Close to Bridgwater? We work across the area, including:

Other extensions in Bridgwater

All two-storey extension services in Bridgwater · First-floor extensions across Somerset

Book a free site visit in Bridgwater and we'll tell you what's possible, what approvals you need and what the design stage would cost.