First-floor extensions in Bedwas
If you live in Bedwas and need more room without moving, a first-floor extension is worth a serious look. We handle the drawings, approvals, structure and build.
What we'd confirm first for a project in Bedwas.
- Postcode districts
- CF83
- County / area
- Gwent, Wales
- Price region
- Wales
- Guide price
- £23,000–£33,500 (£1,660–£2,390 per m²)
- Approval route
- It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
- Nearest towns
- Caerphilly (1.5 miles), Abertridwr (3 miles), Thornhill (3.5 miles)
- Distance to Newport (Gwent)
- about 8.6 miles
- First visit
- Free, no obligation
About a first-floor extension
A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.
Bedwas sits about 8.6 miles from Newport (Gwent). Closer to home, Caerphilly is 1.5 miles away and Abertridwr 3.0 miles.
What it costs in Bedwas
Most of the cost of a first-floor extension is set by its size and specification. For Bedwas and the rest of Wales, our guide is £1,660–£2,390 per m² including VAT, so about £23,000–£33,500 for 4 m × 3.5 m of new first-floor space (14 m²). The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.
| Spec | Per m² | 4 m × 3.5 m of new first-floor space (14 m²) |
|---|---|---|
| Essential | £1,520–£2,200 per m² | £21,500–£31,000 |
| Standard | £1,660–£2,390 per m² | £23,000–£33,500 |
| Premium | £1,990–£2,870 per m² | £28,000–£40,000 |
Planning and building regulations in Bedwas
In Wales, a first floor over a rear extension can be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 10.5 m from the rear boundary, with the ground floor within 4 m. Over a side extension, the 10.5 m, 1 m set-back and 50% width tests apply. Otherwise a householder application costs £585.
Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.
Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).
Design points for Bedwas homes
Can the existing structure take it?
Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.
Replacing the flat roof
The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.
How we'd run your project
Free site visit
We visit your home in Bedwas, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Bedwas.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.
Questions about first-floor extensions in Bedwas
How much does a first-floor extension cost in Bedwas?
Our guide for Wales, which covers Bedwas, is £1,660–£2,390 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £23,000–£33,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
Do I need planning permission for a first-floor extension in Bedwas?
Bedwas is in Wales, so Wales planning rules apply. It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.
Who handles building regulations for a project in Bedwas?
We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.
Can I build on top of my existing single-storey extension?
Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.
What happens to the room below while the first floor is built?
The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.
Nearby
The same service in neighbouring towns:
Other extensions in Bedwas
- Rear
- Side
- Wraparound
- Part two-storey
- Over a garage
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Bedwas · First-floor extensions across Gwent
Tell us about your house in Bedwas and we'll call you back to arrange a free, no-obligation visit.