Part single, part two-storey extensions in Bedwas

Before you start in Bedwas, here's what applies.

Postcode districts: CF83
County / area: Gwent, Wales
Price region: Wales
Guide price: £66,000–£91,000 (£1,840–£2,530 per m²)
Approval route: It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
Nearest towns: Caerphilly (1.5 miles), Abertridwr (3 miles), Thornhill (3.5 miles)
Distance to Newport (Gwent): about 8.6 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

We cover Bedwas (CF83) and the places around it, including Caerphilly (1.5 miles), Abertridwr (3.0 miles) and Thornhill.

What it costs in Bedwas

A guide price for Bedwas: around £66,000–£91,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). That works out at £1,840–£2,530 per m² of new floor space, including VAT at 20%. Design fees, structural calculations and approval fees are separate and listed on our prices page.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,690–£2,330 per m²	£61,000–£84,000
Standard	£1,840–£2,530 per m²	£66,000–£91,000
Premium	£2,210–£3,040 per m²	£79,500–£109,500

Planning and building regulations in Bedwas

In Wales, a part two-storey rear extension can be permitted development if the first floor goes no more than 3 m and the ground floor no more than 4 m beyond the original rear wall, with the first floor at least 10.5 m from the rear boundary. Conservation areas and other protected areas are excluded. If the design falls outside these limits, a householder application costs £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Bedwas homes

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

Where to put the two-storey part

The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.

How we'd run your project

Measure and listen
A visit to Bedwas to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Structure and building control
A structural engineer sizes the foundations and steels, and we get building regulations approval before work starts.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about part single, part two-storey extensions in Bedwas

Who handles building regulations for a project in Bedwas?

We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Bedwas?

We cover Bedwas (CF83) and nearby places including Caerphilly, Abertridwr and Thornhill, plus the rest of Gwent. The first site visit is free.

How much does a part single, part two-storey extension cost in Bedwas?

Our guide for Wales, which covers Bedwas, is £1,840–£2,530 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £66,000–£91,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Nearby

The same service in neighbouring towns:

Other extensions in Bedwas

All two-storey extension services in Bedwas · Part single, part two-storey extensions across Gwent

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.