First-floor extensions in Chippenham
For a first-floor extension in Chippenham, the first questions are always the same: how big, which approvals, and what it will cost. This page answers all three for Wiltshire.
Quick reference for homeowners in Chippenham.
- Postcode districts
- SN15
- County / area
- Wiltshire, England
- Price region
- South West England
- Guide price
- £26,000–£37,500 (£1,850–£2,680 per m²)
- Approval route
- It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
- Nearest towns
- Corsham (3.1 miles), Neston (Wiltshire) (4.6 miles), Calne (5.3 miles)
- Distance to Swindon
- about 16.2 miles
- First visit
- Free, no obligation
About a first-floor extension
A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.
We cover Chippenham (SN15) and the places around it, including Corsham (3.1 miles), Neston (Wiltshire) (4.6 miles) and Calne.
What it costs in Chippenham
A guide price for Chippenham: around £26,000–£37,500 for 4 m × 3.5 m of new first-floor space (14 m²). That works out at £1,850–£2,680 per m² of new floor space, including VAT at 20%. Kitchens, bathroom fittings and flooring are priced separately so you can compare like with like.
| Spec | Per m² | 4 m × 3.5 m of new first-floor space (14 m²) |
|---|---|---|
| Essential | £1,710–£2,460 per m² | £24,000–£34,500 |
| Standard | £1,850–£2,680 per m² | £26,000–£37,500 |
| Premium | £2,220–£3,210 per m² | £31,000–£45,000 |
Planning and building regulations in Chippenham
In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).
Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.
Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.
Design points for Chippenham homes
Tying into the house
The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.
Matching the roofline
A first-floor extension often changes how the back or side of the house looks more than the original single storey did. Matching the main roof pitch and materials, and keeping the ridge below the main ridge, usually gives the best result and is expected for permitted development in England.
How we'd run your project
Look at the house
We start in Chippenham with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.
Questions about first-floor extensions in Chippenham
Which postcodes do you cover around Chippenham?
We cover Chippenham (SN15) and nearby places including Corsham, Neston (Wiltshire) and Calne, plus the rest of Wiltshire. The first site visit is free.
Do I need planning permission for a first-floor extension in Chippenham?
Chippenham is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.
How much does a first-floor extension cost in Chippenham?
Our guide for South West England, which covers Chippenham, is £1,850–£2,680 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £26,000–£37,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
What happens to the room below while the first floor is built?
The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.
Can I build on top of my existing single-storey extension?
Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.
Nearby
We also cover places near Chippenham, including:
Other extensions in Chippenham
- Rear
- Side
- Wraparound
- Part two-storey
- Over a garage
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Chippenham · First-floor extensions across Wiltshire
Book a free site visit in Chippenham and we'll tell you what's possible, what approvals you need and what the design stage would cost.