First-floor extensions in Melksham

Before you start in Melksham, here's what applies.

Postcode districts: SN12
County / area: Wiltshire, England
Price region: South West England
Guide price: £26,000–£37,500 (£1,850–£2,680 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Neston (Wiltshire) (3.8 miles), Corsham (4.7 miles), Trowbridge (4.8 miles)
Distance to Swindon: about 20.1 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

Melksham sits about 20.1 miles from Swindon. Closer to home, Neston (Wiltshire) is 3.8 miles away and Corsham 4.7 miles.

What it costs in Melksham

Expect a first-floor extension in Melksham to land somewhere around £26,000–£37,500 for 4 m × 3.5 m of new first-floor space (14 m²). Our South West England guide rate is £1,850–£2,680 per m², including VAT. Professional fees for drawings and the structural engineer are listed separately on our prices page.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,710–£2,460 per m²	£24,000–£34,500
Standard	£1,850–£2,680 per m²	£26,000–£37,500
Premium	£2,220–£3,210 per m²	£31,000–£45,000

Planning and building regulations in Melksham

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Melksham homes

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

How we'd run your project

Visit and first ideas
One of our team visits your house in Melksham, checks the walls, roof and drains, and sketches out options with you.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Melksham.
Structure and building control
A structural engineer sizes the foundations and steels, and we get building regulations approval before work starts.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.

Questions about first-floor extensions in Melksham

Who handles building regulations for a project in Melksham?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Do I need planning permission for a first-floor extension in Melksham?

Melksham is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Which postcodes do you cover around Melksham?

We cover Melksham (SN12) and nearby places including Neston (Wiltshire), Corsham and Trowbridge, plus the rest of Wiltshire. The first site visit is free.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

Nearby towns we cover for first-floor extensions:

Other extensions in Melksham

All two-storey extension services in Melksham · First-floor extensions across Wiltshire

Tell us about your house in Melksham and we'll call you back to arrange a free, no-obligation visit.