First-floor extensions in Holyhead

Quick reference for homeowners in Holyhead.

Postcode districts: LL64 and LL65
County / area: Gwynedd and Anglesey, Wales
Price region: Wales
Guide price: £23,000–£33,500 (£1,660–£2,390 per m²)
Approval route: It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
Nearest towns: Llangefni (13.7 miles), Amlwch (13.8 miles), Caernarfon (18.8 miles)
Distance to Bangor (Gwynedd and Anglesey): about 21.5 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover Holyhead (LL64 and LL65) and the places around it, including Llangefni (13.7 miles), Amlwch (13.8 miles) and Caernarfon.

What it costs in Holyhead

Using our Wales rates, a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £23,000–£33,500, including VAT. Bigger or more glazed designs cost more per m². Keep a contingency of around 10% for things nobody can see until the ground is opened up.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,520–£2,200 per m²	£21,500–£31,000
Standard	£1,660–£2,390 per m²	£23,000–£33,500
Premium	£1,990–£2,870 per m²	£28,000–£40,000

Planning and building regulations in Holyhead

In Wales, a first floor over a rear extension can be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 10.5 m from the rear boundary, with the ground floor within 4 m. Over a side extension, the 10.5 m, 1 m set-back and 50% width tests apply. Otherwise a householder application costs £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Holyhead homes

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

How we'd run your project

Measure and listen
A visit to Holyhead to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Holyhead.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about first-floor extensions in Holyhead

Which postcodes do you cover around Holyhead?

We cover Holyhead (LL64 and LL65) and nearby places including Llangefni, Amlwch and Caernarfon, plus the rest of Gwynedd and Anglesey. The first site visit is free.

Who handles building regulations for a project in Holyhead?

We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

Other towns near Holyhead:

Other extensions in Holyhead

All two-storey extension services in Holyhead · First-floor extensions across Gwynedd and Anglesey

Tell us about your house in Holyhead and we'll call you back to arrange a free, no-obligation visit.