Two-storey wraparound extensions in Holyhead

Holyhead: the key facts for this kind of project.

Postcode districts: LL64 and LL65
County / area: Gwynedd and Anglesey, Wales
Price region: Wales
Guide price: £111,000–£152,000 (£1,980–£2,710 per m²)
Approval route: Usually needs planning permission, because the combined side and rear works rarely meet every permitted development test.
Nearest towns: Llangefni (13.7 miles), Amlwch (13.8 miles), Caernarfon (18.8 miles)
Distance to Bangor (Gwynedd and Anglesey): about 21.5 miles
First visit: Free, no obligation

About a two-storey wraparound extension

A two-storey wraparound extension is an L-shaped addition that extends both the side and the rear of your house, on two floors. It gives one of the largest gains in floor space of any extension, typically a big open-plan kitchen and living area below and two or more bedrooms or bathrooms above.

We cover postcode districts LL64 and LL65 in and around Holyhead, along with neighbouring Llangefni, Amlwch and Caernarfon.

What it costs in Holyhead

Expect a two-storey wraparound extension in Holyhead to land somewhere around £111,000–£152,000 for an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space). Our Wales guide rate is £1,980–£2,710 per m², including VAT. These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.

Spec	Per m²	An L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space)
Essential	£1,820–£2,500 per m²	£102,000–£140,000
Standard	£1,980–£2,710 per m²	£111,000–£152,000
Premium	£2,370–£3,260 per m²	£133,000–£182,500

Planning and building regulations in Holyhead

In Wales, a wraparound would have to pass both the side and rear tests to be permitted development: 10.5 m to the opposite side boundary, a 1 m set-back from the front and no more than 50% added width, plus the 4 m and 3 m rear depth limits and 10.5 m to the rear boundary. Many wraparounds therefore need a householder application, which costs £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Holyhead homes

Phasing the build

A wraparound touches two sides of the house at once, so the kitchen and often the rear rooms are out of use for part of the build. We plan the sequence so you keep a working kitchen and bathroom for as long as possible, or advise when moving out briefly makes sense.

Two roofs that meet

A wraparound needs the side roof and rear roof to join cleanly, often with a valley or hip where they meet. Getting pitches and ridge heights right keeps rainwater moving and avoids a bulky mass at the back corner, which neighbours and planners notice.

How we'd run your project

Understand the brief
At your home in Holyhead we agree what you need: bedroom count, bathroom, kitchen space, and how much garden you want to keep.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Holyhead.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about two-storey wraparound extensions in Holyhead

How much does a two-storey wraparound extension cost in Holyhead?

Our guide for Wales, which covers Holyhead, is £1,980–£2,710 per m² including VAT. A typical project with an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space) comes to about £111,000–£152,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

How long does a two-storey wraparound extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which postcodes do you cover around Holyhead?

We cover Holyhead (LL64 and LL65) and nearby places including Llangefni, Amlwch and Caernarfon, plus the rest of Gwynedd and Anglesey. The first site visit is free.

Does a wraparound extension need steel?

Almost always. Opening the corner of the house and the old rear wall to make one open-plan space means steel beams, and often a steel post or frame at the outside corner. The structural engineer sizes these, and the steel is ordered once the design is fixed, which is one reason a wraparound needs careful sequencing.

How much floor space does a wraparound extension add?

It depends on the width of the side plot and the depth at the rear. Our guide prices are based on a typical wraparound with an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space). Yours may be larger or smaller, and the measured survey shows what your plot can take.

Nearby

Other towns near Holyhead:

Other extensions in Holyhead

All two-storey extension services in Holyhead · Two-storey wraparound extensions across Gwynedd and Anglesey

Want a figure first? Try our guide price tool, then book a free visit to firm it up.