First-floor extensions in Ilkeston

What we'd confirm first for a project in Ilkeston.

Postcode districts: DE7
County / area: Derbyshire, England
Price region: East Midlands
Guide price: £24,500–£35,500 (£1,760–£2,550 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Kimberley (2 miles), Eastwood (2.1 miles), Heanor (3.5 miles)
Distance to Derby: about 7.7 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover Ilkeston (DE7) and the places around it, including Kimberley (2.0 miles), Eastwood (2.1 miles) and Heanor.

What it costs in Ilkeston

Guide prices for first-floor extensions in the East Midlands are around £1,760–£2,550 per m² of new floor space, including VAT. For a typical project with 4 m × 3.5 m of new first-floor space (14 m²), that's roughly £24,500–£35,500. The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,620–£2,340 per m²	£22,500–£33,000
Standard	£1,760–£2,550 per m²	£24,500–£35,500
Premium	£2,120–£3,060 per m²	£29,500–£43,000

Planning and building regulations in Ilkeston

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Ilkeston homes

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

How we'd run your project

Look at the house
We start in Ilkeston with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Design and approvals
We draw the extension and check it against the rules for England, then apply for planning permission or a certificate of lawfulness, whichever fits.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about first-floor extensions in Ilkeston

How much does a first-floor extension cost in Ilkeston?

Our guide for the East Midlands, which covers Ilkeston, is £1,760–£2,550 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £24,500–£35,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which postcodes do you cover around Ilkeston?

We cover Ilkeston (DE7) and nearby places including Kimberley, Eastwood and Heanor, plus the rest of Derbyshire. The first site visit is free.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Nearby

The same service in neighbouring towns:

Other extensions in Ilkeston

All two-storey extension services in Ilkeston · First-floor extensions across Derbyshire

Book a free site visit in Ilkeston and we'll tell you what's possible, what approvals you need and what the design stage would cost.