First-floor extensions in Long Eaton

What we'd confirm first for a project in Long Eaton.

Postcode districts: DE72 and NG10
County / area: Derbyshire, England
Price region: East Midlands
Guide price: £24,500–£35,500 (£1,760–£2,550 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Ilkeston (5.2 miles), Kimberley (5.9 miles), Basford (6 miles)
Distance to Derby: about 8.7 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

Long Eaton sits about 8.7 miles from Derby. Closer to home, Ilkeston is 5.2 miles away and Kimberley 5.9 miles.

What it costs in Long Eaton

Guide prices for first-floor extensions in the East Midlands are around £1,760–£2,550 per m² of new floor space, including VAT. For a typical project with 4 m × 3.5 m of new first-floor space (14 m²), that's roughly £24,500–£35,500. Keep a contingency of around 10% for things nobody can see until the ground is opened up.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,620–£2,340 per m²	£22,500–£33,000
Standard	£1,760–£2,550 per m²	£24,500–£35,500
Premium	£2,120–£3,060 per m²	£29,500–£43,000

Planning and building regulations in Long Eaton

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Long Eaton homes

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

How we'd run your project

Measure and listen
A visit to Long Eaton to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Long Eaton.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about first-floor extensions in Long Eaton

Who handles building regulations for a project in Long Eaton?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Do I need planning permission for a first-floor extension in Long Eaton?

Long Eaton is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

We also cover places near Long Eaton, including:

Other extensions in Long Eaton

All two-storey extension services in Long Eaton · First-floor extensions across Derbyshire

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.