Part single, part two-storey extensions in Long Eaton

Useful details for planning a part single, part two-storey extension in Long Eaton.

Postcode districts: DE72 and NG10
County / area: Derbyshire, England
Price region: East Midlands
Guide price: £70,500–£97,000 (£1,960–£2,700 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Ilkeston (5.2 miles), Kimberley (5.9 miles), Basford (6 miles)
Distance to Derby: about 8.7 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.

Long Eaton sits about 8.7 miles from Derby. Closer to home, Ilkeston is 5.2 miles away and Kimberley 5.9 miles.

What it costs in Long Eaton

Our guide for the East Midlands is £1,960–£2,700 per m² including VAT. On a project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total), that puts a part single, part two-storey extension in Long Eaton at roughly £70,500–£97,000. Keep a contingency of around 10% for things nobody can see until the ground is opened up.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,800–£2,480 per m²	£65,000–£89,500
Standard	£1,960–£2,700 per m²	£70,500–£97,000
Premium	£2,350–£3,230 per m²	£84,500–£116,500

Planning and building regulations in Long Eaton

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Long Eaton homes

Where to put the two-storey part

The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

How we'd run your project

Look at the house
We start in Long Eaton with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Long Eaton.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about part single, part two-storey extensions in Long Eaton

Who handles building regulations for a project in Long Eaton?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does a part single, part two-storey extension cost in Long Eaton?

Our guide for the East Midlands, which covers Long Eaton, is £1,960–£2,700 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £70,500–£97,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which postcodes do you cover around Long Eaton?

We cover Long Eaton (DE72 and NG10) and nearby places including Ilkeston, Kimberley and Basford, plus the rest of Derbyshire. The first site visit is free.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Nearby

Other towns near Long Eaton:

Other extensions in Long Eaton

All two-storey extension services in Long Eaton · Part single, part two-storey extensions across Derbyshire

Book a free site visit in Long Eaton and we'll tell you what's possible, what approvals you need and what the design stage would cost.