Mountsorrel · Leicestershire

First-floor extensions in Mountsorrel

For a first-floor extension in Mountsorrel, the first questions are always the same: how big, which approvals, and what it will cost. This page answers all three for Leicestershire.

What we'd confirm first for a project in Mountsorrel.

Postcode districts
LE4
County / area
Leicestershire, England
Price region
East Midlands
Guide price
£24,500–£35,500 (£1,760–£2,550 per m²)
Approval route
It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns
Birstall (3.7 miles), Loughborough (4 miles), Syston (4.2 miles)
Distance to Leicester
about 5.5 miles
First visit
Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

Around Mountsorrel we also work in Birstall, Loughborough and Syston, and across the rest of Leicestershire. Postcode district in and near Mountsorrel: LE4.

What it costs in Mountsorrel

Guide prices for first-floor extensions in the East Midlands are around £1,760–£2,550 per m² of new floor space, including VAT. For a typical project with 4 m × 3.5 m of new first-floor space (14 m²), that's roughly £24,500–£35,500. Keep a contingency of around 10% for things nobody can see until the ground is opened up.

SpecPer m²4 m × 3.5 m of new first-floor space (14 m²)
Essential£1,620–£2,340 per m²£22,500–£33,000
Standard£1,760–£2,550 per m²£24,500–£35,500
Premium£2,120–£3,060 per m²£29,500–£43,000

Planning and building regulations in Mountsorrel

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Mountsorrel homes

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

How we'd run your project

  1. Understand the brief

    At your home in Mountsorrel we agree what you need: bedroom count, bathroom, kitchen space, and how much garden you want to keep.

  2. Plans, then approval

    Measured survey, design, then the right approval route for your house. We explain each step before we take it.

  3. Engineer it

    Foundations sized for two floors, steels for any openings, and building control approval, all before anyone starts on site.

  4. Build and sign-off

    Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.

Questions about first-floor extensions in Mountsorrel

Which postcodes do you cover around Mountsorrel?

We cover Mountsorrel (LE4) and nearby places including Birstall, Loughborough and Syston, plus the rest of Leicestershire. The first site visit is free.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Who handles building regulations for a project in Mountsorrel?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

Nearby towns we cover for first-floor extensions:

Other extensions in Mountsorrel

All two-storey extension services in Mountsorrel · First-floor extensions across Leicestershire

Book a free site visit in Mountsorrel and we'll tell you what's possible, what approvals you need and what the design stage would cost.

CallGuide price