First-floor extensions in Pembroke
If you live in Pembroke and need more room without moving, a first-floor extension is worth a serious look. We handle the drawings, approvals, structure and build.
Quick reference for homeowners in Pembroke.
- Postcode districts
- SA71
- County / area
- Dyfed, Wales
- Price region
- Wales
- Guide price
- £23,000–£33,500 (£1,660–£2,390 per m²)
- Approval route
- It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
- Nearest towns
- Pembroke Dock (1.7 miles), Neyland (3 miles), Milford Haven (5.8 miles)
- Distance to Llanelli
- about 32.2 miles
- First visit
- Free, no obligation
About a first-floor extension
A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.
We cover postcode district SA71 in and around Pembroke, along with neighbouring Pembroke Dock, Neyland and Milford Haven.
What it costs in Pembroke
For budgeting in Pembroke, allow around £23,000–£33,500 for a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²). That's based on £1,660–£2,390 per m² including VAT for Wales. These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.
| Spec | Per m² | 4 m × 3.5 m of new first-floor space (14 m²) |
|---|---|---|
| Essential | £1,520–£2,200 per m² | £21,500–£31,000 |
| Standard | £1,660–£2,390 per m² | £23,000–£33,500 |
| Premium | £1,990–£2,870 per m² | £28,000–£40,000 |
Planning and building regulations in Pembroke
In Wales, a first floor over a rear extension can be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 10.5 m from the rear boundary, with the ground floor within 4 m. Over a side extension, the 10.5 m, 1 m set-back and 50% width tests apply. Otherwise a householder application costs £585.
Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.
Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).
Design points for Pembroke homes
Can the existing structure take it?
Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.
Escape and fire safety
A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.
How we'd run your project
Measure and listen
A visit to Pembroke to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.
Questions about first-floor extensions in Pembroke
How long does a first-floor extension take?
Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.
How much does a first-floor extension cost in Pembroke?
Our guide for Wales, which covers Pembroke, is £1,660–£2,390 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £23,000–£33,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
Who handles building regulations for a project in Pembroke?
We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.
What happens to the room below while the first floor is built?
The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.
Can I build on top of my existing single-storey extension?
Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.
Nearby
Close to Pembroke? We work across the area, including:
Other extensions in Pembroke
- Rear
- Side
- Wraparound
- Part two-storey
- Over a garage
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Pembroke · First-floor extensions across Dyfed
The quickest next step is a visit. We'll look at your house in Pembroke and give you an honest view of the options.