First-floor extensions in Milford Haven

Before you start in Milford Haven, here's what applies.

Postcode districts: SA73
County / area: Dyfed, Wales
Price region: Wales
Guide price: £23,000–£33,500 (£1,660–£2,390 per m²)
Approval route: It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
Nearest towns: Steynton (1.3 miles), Neyland (3.5 miles), Pembroke Dock (4.3 miles)
Distance to Llanelli: about 37.4 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

We cover Milford Haven (SA73) and the places around it, including Steynton (1.3 miles), Neyland (3.5 miles) and Pembroke Dock.

What it costs in Milford Haven

A guide price for Milford Haven: around £23,000–£33,500 for 4 m × 3.5 m of new first-floor space (14 m²). That works out at £1,660–£2,390 per m² of new floor space, including VAT at 20%. The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,520–£2,200 per m²	£21,500–£31,000
Standard	£1,660–£2,390 per m²	£23,000–£33,500
Premium	£1,990–£2,870 per m²	£28,000–£40,000

Planning and building regulations in Milford Haven

In Wales, a first floor over a rear extension can be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 10.5 m from the rear boundary, with the ground floor within 4 m. Over a side extension, the 10.5 m, 1 m set-back and 50% width tests apply. Otherwise a householder application costs £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Milford Haven homes

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

How we'd run your project

Start at your house
We come to your home in Milford Haven, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in Wales before drawing in detail.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build
Foundations, walls, floor, roof, windows, then first and second fix. We break through into the house as late as we can.

Questions about first-floor extensions in Milford Haven

Who handles building regulations for a project in Milford Haven?

We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

How much does a first-floor extension cost in Milford Haven?

Our guide for Wales, which covers Milford Haven, is £1,660–£2,390 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £23,000–£33,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Nearby

Nearby towns we cover for first-floor extensions:

Other extensions in Milford Haven

All two-storey extension services in Milford Haven · First-floor extensions across Dyfed

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Milford Haven.