Two-storey extensions for semi-detached houses in Milford Haven

What we'd confirm first for a project in Milford Haven.

Postcode districts: SA73
County / area: Dyfed, Wales
Price region: Wales
Guide price: £51,500–£69,500 (£1,840–£2,480 per m²)
Approval route: Depends on position: rear (3 m first floor, 10.5 m to the boundary) and some side extensions (10.5 m, 1 m set-back) can be permitted development in Wales.
Nearest towns: Steynton (1.3 miles), Neyland (3.5 miles), Pembroke Dock (4.3 miles)
Distance to Llanelli: about 37.4 miles
First visit: Free, no obligation

About a two-storey extension for a semi-detached house

A two-storey extension for a semi-detached house is a two-floor addition to the rear, the open side, or both, designed around the attached neighbour on one side. The rear is often the simplest option and can sometimes be permitted development, while a side extension uses the gap on the detached side. Both need care with the shared party wall and the neighbour's light.

We cover postcode district SA73 in and around Milford Haven, along with neighbouring Steynton, Neyland and Pembroke Dock.

What it costs in Milford Haven

Most of the cost of a two-storey extension for a semi-detached house is set by its size and specification. For Milford Haven and the rest of Wales, our guide is £1,840–£2,480 per m² including VAT, so about £51,500–£69,500 for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). Professional fees for drawings and the structural engineer are listed separately on our prices page.

Spec	Per m²	A 4 m × 3.5 m footprint on two floors (28 m² of new floor space)
Essential	£1,690–£2,290 per m²	£47,500–£64,000
Standard	£1,840–£2,480 per m²	£51,500–£69,500
Premium	£2,210–£2,980 per m²	£62,000–£83,500

Planning and building regulations in Milford Haven

In Wales, a semi can take a two-storey rear extension under permitted development with the ground floor up to 4 m and the first floor up to 3 m beyond the original rear wall, 10.5 m from the rear boundary. A side extension can also be permitted development if it is 10.5 m from the side boundary, set back 1 m and adds no more than 50% width. Otherwise the fee is £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Milford Haven homes

The attached neighbour's light

A two-storey rear extension next to the party wall can take light from the neighbour's rear windows. Councils often use a 45-degree test, so the first floor may need to be shorter than the ground floor or set in from the shared boundary.

Rear, side or both

On a semi, a rear extension sits against the attached neighbour, while a side extension faces the detached neighbour and the street. We compare the space, cost and approval route for each, and for a wraparound, before you commit to one design.

How we'd run your project

Look at the house
We start in Milford Haven with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in Wales before drawing in detail.
Engineer it
Foundations sized for two floors, steels for any openings, and building control approval, all before anyone starts on site.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about two-storey extensions for semi-detached houses in Milford Haven

Who handles building regulations for a project in Milford Haven?

We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Do I need planning permission for a two-storey extension for a semi-detached house in Milford Haven?

Milford Haven is in Wales, so Wales planning rules apply. Depends on position: rear (3 m first floor, 10.5 m to the boundary) and some side extensions (10.5 m, 1 m set-back) can be permitted development in Wales. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

How much does a two-storey extension for a semi-detached house cost in Milford Haven?

Our guide for Wales, which covers Milford Haven, is £1,840–£2,480 per m² including VAT. A typical project with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £51,500–£69,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Will a side extension make my semi look like a terrace?

It can if it fills the whole gap to the boundary at first floor and the neighbour does the same. Many councils ask for a first-floor gap to the side boundary or a set-back for this reason. We design the extension to keep the semi reading as one of a pair.

Does a two-storey extension add value to a semi-detached house?

It usually adds value, but the gain is never certain. Nationwide's 2025 research found that 10% more floor area was linked to about 5% higher value, and that adding a double bedroom and bathroom to a three-bed, one-bathroom house could add up to 24%. Every street has a ceiling price, so check local sales first.

Nearby

Close to Milford Haven? We work across the area, including:

Other extensions in Milford Haven

All two-storey extension services in Milford Haven · Two-storey extensions for semi-detached houses across Dyfed

Book a free site visit in Milford Haven and we'll tell you what's possible, what approvals you need and what the design stage would cost.