Perth · Perth and Kinross

First-floor extensions in Perth

For a first-floor extension in Perth, the first questions are always the same: how big, which approvals, and what it will cost. This page answers all three for Perth and Kinross.

Useful details for planning a first-floor extension in Perth.

Postcode districts
PH1 and PH2
County / area
Perth and Kinross, Scotland
Price region
Scotland
Guide price
£23,500–£34,000 (£1,690–£2,440 per m²)
Approval route
Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
Nearest towns
Scone (2 miles), Bridge of Earn (3.4 miles), Auchterarder (12.6 miles)
First visit
Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover Perth (PH1 and PH2) and the places around it, including Scone (2.0 miles), Bridge of Earn (3.4 miles) and Auchterarder.

What it costs in Perth

In Scotland, which includes Perth, we'd expect a first-floor extension to cost around £23,500–£34,000 for 4 m × 3.5 m of new first-floor space (14 m²), or £1,690–£2,440 per m² including VAT. These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.

SpecPer m²4 m × 3.5 m of new first-floor space (14 m²)
Essential£1,560–£2,250 per m²£22,000–£31,500
Standard£1,690–£2,440 per m²£23,500–£34,000
Premium£2,030–£2,930 per m²£28,500–£41,000

Planning and building standards in Perth

In Scotland, permitted development for extensions of more than one storey (Class 1B) needs at least 10 m to every boundary and no part higher than the house. Most first-floor extensions cannot meet the 10 m test, so plan for a householder application (£371, decided within two months) and a building warrant before work starts.

Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.

Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.

Design points for Perth homes

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

How we'd run your project

  1. Look at the house

    We start in Perth with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.

  2. Choose the approval route

    Some designs fit permitted development, most need a householder application. We decide which applies in Scotland before drawing in detail.

  3. Engineer it

    Foundations sized for two floors, steels for any openings, and a building warrant, all before anyone starts on site.

  4. Build and hand over

    We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about first-floor extensions in Perth

How much does a first-floor extension cost in Perth?

Our guide for Scotland, which covers Perth, is £1,690–£2,440 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £23,500–£34,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which postcodes do you cover around Perth?

We cover Perth (PH1 and PH2) and nearby places including Scone, Bridge of Earn and Auchterarder, plus the rest of Perth and Kinross. The first site visit is free.

Who handles building standards for a project in Perth?

We handle it as part of the project. What's needed in Scotland: a building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original a building warrant and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

The same service in neighbouring towns:

Other extensions in Perth

All two-storey extension services in Perth · First-floor extensions across Perth and Kinross

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.

CallGuide price