Part single, part two-storey extensions in Perth

The basics for Perth at a glance.

Postcode districts: PH1 and PH2
County / area: Perth and Kinross, Scotland
Price region: Scotland
Guide price: £67,500–£93,000 (£1,880–£2,580 per m²)
Approval route: Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
Nearest towns: Scone (2 miles), Bridge of Earn (3.4 miles), Auchterarder (12.6 miles)
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, a building warrant and the build, carried out by vetted teams working under S&K.

We cover postcode districts PH1 and PH2 in and around Perth, along with neighbouring Scone, Bridge of Earn and Auchterarder.

What it costs in Perth

Expect a part single, part two-storey extension in Perth to land somewhere around £67,500–£93,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). Our Scotland guide rate is £1,880–£2,580 per m², including VAT. Design fees, structural calculations and approval fees are separate and listed on our prices page.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,730–£2,380 per m²	£62,500–£85,500
Standard	£1,880–£2,580 per m²	£67,500–£93,000
Premium	£2,260–£3,100 per m²	£81,000–£111,500

Planning and building standards in Perth

In Scotland, because part of the extension is more than one storey, it is assessed under Class 1B, which needs at least 10 m to every boundary for permitted development. On most plots that is not possible, so the extension needs a householder application (£371, decided within two months). A building warrant is also needed before any work starts.

Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.

Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.

Design points for Perth homes

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

How we'd run your project

Look at the house
We start in Perth with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Perth.
Structure and building standards
A structural engineer sizes the foundations and steels, and we get a building warrant before work starts.
Finish and certify
Second fix, plastering and making good, then the council's final building standards inspection and the completion paperwork.

Questions about part single, part two-storey extensions in Perth

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils have two months to decide a local planning application), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which postcodes do you cover around Perth?

We cover Perth (PH1 and PH2) and nearby places including Scone, Bridge of Earn and Auchterarder, plus the rest of Perth and Kinross. The first site visit is free.

How much does a part single, part two-storey extension cost in Perth?

Our guide for Scotland, which covers Perth, is £1,880–£2,580 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £67,500–£93,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Nearby

Close to Perth? We work across the area, including:

Other extensions in Perth

All two-storey extension services in Perth · Part single, part two-storey extensions across Perth and Kinross

Tell us about your house in Perth and we'll call you back to arrange a free, no-obligation visit.