First-floor extensions in Pinner

What we'd confirm first for a project in Pinner.

Postcode districts: HA5
County / area: Greater London, England
Price region: London
Guide price: £30,000–£43,500 (£2,160–£3,120 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Hatch End (1 mile), Northwood Hills (1.2 miles), Wealdstone (2 miles)
First visit: Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

Around Pinner we also work in Hatch End, Northwood Hills and Wealdstone, and across the rest of Greater London. Postcode district in and near Pinner: HA5.

What it costs in Pinner

Most of the cost of a first-floor extension is set by its size and specification. For Pinner and the rest of London, our guide is £2,160–£3,120 per m² including VAT, so about £30,000–£43,500 for 4 m × 3.5 m of new first-floor space (14 m²). Design fees, structural calculations and approval fees are separate and listed on our prices page.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,990–£2,870 per m²	£28,000–£40,000
Standard	£2,160–£3,120 per m²	£30,000–£43,500
Premium	£2,590–£3,740 per m²	£36,500–£52,500

Planning and building regulations in Pinner

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Pinner homes

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

Matching the roofline

A first-floor extension often changes how the back or side of the house looks more than the original single storey did. Matching the main roof pitch and materials, and keeping the ridge below the main ridge, usually gives the best result and is expected for permitted development in England.

How we'd run your project

Understand the brief
At your home in Pinner we agree what you need: bedroom count, bathroom, kitchen space, and how much garden you want to keep.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in England before drawing in detail.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about first-floor extensions in Pinner

How much does a first-floor extension cost in Pinner?

Our guide for London, which covers Pinner, is £2,160–£3,120 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £30,000–£43,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which postcodes do you cover around Pinner?

We cover Pinner (HA5) and nearby places including Hatch End, Northwood Hills and Wealdstone, plus the rest of Greater London. The first site visit is free.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

Other towns near Pinner:

Other extensions in Pinner

All two-storey extension services in Pinner · First-floor extensions across Greater London

Want a figure first? Try our guide price tool, then book a free visit to firm it up.