Two-storey extensions for semi-detached houses in Pinner
For a two-storey extension for a semi-detached house in Pinner, the first questions are always the same: how big, which approvals, and what it will cost. This page answers all three for Greater London.
What we'd confirm first for a project in Pinner.
- Postcode districts
- HA5
- County / area
- Greater London, England
- Price region
- London
- Guide price
- £67,000–£90,500 (£2,400–£3,240 per m²)
- Approval route
- Depends on position: a two-storey rear extension may be permitted development (3 m deep, 7 m from the rear boundary); a two-storey side extension needs planning permission.
- Nearest towns
- Hatch End (1 mile), Northwood Hills (1.2 miles), Wealdstone (2 miles)
- First visit
- Free, no obligation
About a two-storey extension for a semi-detached house
This service suits you if you own a semi-detached house and want to add bedrooms and living space without moving. On a semi, the main questions are which side to build on and how to treat the attached neighbour. You get a survey, design options, the approvals your nation needs and the build, carried out by vetted teams working under S&K.
We cover Pinner (HA5) and the places around it, including Hatch End (1.0 miles), Northwood Hills (1.2 miles) and Wealdstone.
What it costs in Pinner
Using our London rates, a two-storey extension for a semi-detached house with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £67,000–£90,500, including VAT. Bigger or more glazed designs cost more per m². Keep a contingency of around 10% for things nobody can see until the ground is opened up.
| Spec | Per m² | A 4 m × 3.5 m footprint on two floors (28 m² of new floor space) |
|---|---|---|
| Essential | £2,210–£2,980 per m² | £62,000–£83,500 |
| Standard | £2,400–£3,240 per m² | £67,000–£90,500 |
| Premium | £2,880–£3,890 per m² | £80,500–£109,000 |
Planning and building regulations in Pinner
In England, a two-storey rear extension on a semi can be permitted development if it goes no more than 3 m beyond the original rear wall and stays 7 m from the rear boundary, with matching materials and roof pitch. A two-storey side or wraparound extension always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026). Protected areas such as conservation areas exclude two-storey rear permitted development.
Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.
Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.
Design points for Pinner homes
Keeping the pair balanced
Semis are designed as matching pairs, and a side extension changes that balance. Setting the side extension back from the front wall and keeping its ridge lower helps the pair still read as a pair, which councils' design guides commonly ask for.
Rear, side or both
On a semi, a rear extension sits against the attached neighbour, while a side extension faces the detached neighbour and the street. We compare the space, cost and approval route for each, and for a wraparound, before you commit to one design.
How we'd run your project
Start at your house
We come to your home in Pinner, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in England before drawing in detail.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.
Questions about two-storey extensions for semi-detached houses in Pinner
Who handles building regulations for a project in Pinner?
We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.
Which postcodes do you cover around Pinner?
We cover Pinner (HA5) and nearby places including Hatch End, Northwood Hills and Wealdstone, plus the rest of Greater London. The first site visit is free.
How long does a two-storey extension for a semi-detached house take?
Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.
Will a side extension make my semi look like a terrace?
It can if it fills the whole gap to the boundary at first floor and the neighbour does the same. Many councils ask for a first-floor gap to the side boundary or a set-back for this reason. We design the extension to keep the semi reading as one of a pair.
Should I extend my semi to the side or the rear?
It depends on your plot and what you need. A rear extension keeps the side drive and can sometimes be permitted development, but it affects the attached neighbour. A side extension keeps the rear garden but always needs planning permission in England. We compare both at the free site visit.
Nearby
The same service in neighbouring towns:
Other extensions in Pinner
- Rear
- Side
- Wraparound
- Part two-storey
- Over a garage
- First floor
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Pinner · Two-storey extensions for semi-detached houses across Greater London
Tell us about your house in Pinner and we'll call you back to arrange a free, no-obligation visit.