First-floor extensions in Rochester

The basics for Rochester at a glance.

Postcode districts: ME1
County / area: Kent, England
Price region: South East England
Guide price: £27,500–£40,000 (£1,980–£2,860 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Chatham (1.1 miles), Strood (1.3 miles), Gillingham (1.9 miles)
Distance to Maidstone: about 8.4 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

Rochester sits about 8.4 miles from Maidstone. Closer to home, Chatham is 1.1 miles away and Strood 1.3 miles.

What it costs in Rochester

Using our South East England rates, a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £27,500–£40,000, including VAT. Bigger or more glazed designs cost more per m². Steelwork for wide openings is the item most likely to move the figure; we'll know once the engineer has designed it.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,820–£2,630 per m²	£25,500–£37,000
Standard	£1,980–£2,860 per m²	£27,500–£40,000
Premium	£2,380–£3,430 per m²	£33,500–£48,000

Planning and building regulations in Rochester

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Rochester homes

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

How we'd run your project

Look at the house
We start in Rochester with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about first-floor extensions in Rochester

Which postcodes do you cover around Rochester?

We cover Rochester (ME1) and nearby places including Chatham, Strood and Gillingham, plus the rest of Kent. The first site visit is free.

Who handles building regulations for a project in Rochester?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Do I need planning permission for a first-floor extension in Rochester?

Rochester is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

Close to Rochester? We work across the area, including:

Other extensions in Rochester

All two-storey extension services in Rochester · First-floor extensions across Kent

Tell us about your house in Rochester and we'll call you back to arrange a free, no-obligation visit.