First-floor extensions in Sandy

What we'd confirm first for a project in Sandy.

Postcode districts: SG19
County / area: Bedfordshire, England
Price region: East of England
Guide price: £26,000–£37,500 (£1,850–£2,680 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Biggleswade (3.1 miles), St Neots (6.1 miles), Henlow (6.8 miles)
Distance to Luton: about 18.1 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

We cover postcode district SG19 in and around Sandy, along with neighbouring Biggleswade, St Neots and Henlow.

What it costs in Sandy

In the East of England, which includes Sandy, we'd expect a first-floor extension to cost around £26,000–£37,500 for 4 m × 3.5 m of new first-floor space (14 m²), or £1,850–£2,680 per m² including VAT. Steelwork for wide openings is the item most likely to move the figure; we'll know once the engineer has designed it.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,710–£2,460 per m²	£24,000–£34,500
Standard	£1,850–£2,680 per m²	£26,000–£37,500
Premium	£2,220–£3,210 per m²	£31,000–£45,000

Planning and building regulations in Sandy

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Sandy homes

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

How we'd run your project

Look at the house
We start in Sandy with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Sandy.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about first-floor extensions in Sandy

Which postcodes do you cover around Sandy?

We cover Sandy (SG19) and nearby places including Biggleswade, St Neots and Henlow, plus the rest of Bedfordshire. The first site visit is free.

Do I need planning permission for a first-floor extension in Sandy?

Sandy is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

Nearby towns we cover for first-floor extensions:

Other extensions in Sandy

All two-storey extension services in Sandy · First-floor extensions across Bedfordshire

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.