First-floor extensions in Sinfin

Useful details for planning a first-floor extension in Sinfin.

Postcode districts: DE23, DE24 and DE73
County / area: Derbyshire, England
Price region: East Midlands
Guide price: £24,500–£35,500 (£1,760–£2,550 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Derby (2.9 miles), Chaddesden (4 miles), Oakwood (Derbyshire) (4.9 miles)
Distance to Derby: about 2.9 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover Sinfin (DE23, DE24 and DE73) and the places around it, including Derby (2.9 miles), Chaddesden (4.0 miles) and Oakwood (Derbyshire).

What it costs in Sinfin

Guide prices for first-floor extensions in the East Midlands are around £1,760–£2,550 per m² of new floor space, including VAT. For a typical project with 4 m × 3.5 m of new first-floor space (14 m²), that's roughly £24,500–£35,500. Professional fees for drawings and the structural engineer are listed separately on our prices page.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,620–£2,340 per m²	£22,500–£33,000
Standard	£1,760–£2,550 per m²	£24,500–£35,500
Premium	£2,120–£3,060 per m²	£29,500–£43,000

Planning and building regulations in Sinfin

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Sinfin homes

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

Matching the roofline

A first-floor extension often changes how the back or side of the house looks more than the original single storey did. Matching the main roof pitch and materials, and keeping the ridge below the main ridge, usually gives the best result and is expected for permitted development in England.

How we'd run your project

Start at your house
We come to your home in Sinfin, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Build
Foundations, walls, floor, roof, windows, then first and second fix. We break through into the house as late as we can.

Questions about first-floor extensions in Sinfin

Which postcodes do you cover around Sinfin?

We cover Sinfin (DE23, DE24 and DE73) and nearby places including Derby, Chaddesden and Oakwood (Derbyshire), plus the rest of Derbyshire. The first site visit is free.

How much does a first-floor extension cost in Sinfin?

Our guide for the East Midlands, which covers Sinfin, is £1,760–£2,550 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £24,500–£35,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Who handles building regulations for a project in Sinfin?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

We also cover places near Sinfin, including:

Other extensions in Sinfin

All two-storey extension services in Sinfin · First-floor extensions across Derbyshire

Want a figure first? Try our guide price tool, then book a free visit to firm it up.