First-floor extensions in Telford

The basics for Telford at a glance.

Postcode districts: TF2, TF3, TF4, TF7, TF8 and TF12
County / area: Shropshire, England
Price region: West Midlands
Guide price: £25,000–£36,500 (£1,800–£2,600 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Hadley (2.2 miles), Wellington (3.3 miles), Ryton (5.9 miles)
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover Telford (TF2, TF3, TF4, TF7, TF8 and TF12) and the places around it, including Hadley (2.2 miles), Wellington (3.3 miles) and Ryton.

What it costs in Telford

For budgeting in Telford, allow around £25,000–£36,500 for a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²). That's based on £1,800–£2,600 per m² including VAT for the West Midlands. Kitchens, bathroom fittings and flooring are priced separately so you can compare like with like.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,660–£2,390 per m²	£23,000–£33,500
Standard	£1,800–£2,600 per m²	£25,000–£36,500
Premium	£2,160–£3,120 per m²	£30,000–£43,500

Planning and building regulations in Telford

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Telford homes

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

How we'd run your project

Measure and listen
A visit to Telford to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Telford.
Structure and building control
A structural engineer sizes the foundations and steels, and we get building regulations approval before work starts.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about first-floor extensions in Telford

How much does a first-floor extension cost in Telford?

Our guide for the West Midlands, which covers Telford, is £1,800–£2,600 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £25,000–£36,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which postcodes do you cover around Telford?

We cover Telford (TF2, TF3, TF4, TF7, TF8 and TF12) and nearby places including Hadley, Wellington and Ryton, plus the rest of Shropshire. The first site visit is free.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

Nearby towns we cover for first-floor extensions:

Other extensions in Telford

All two-storey extension services in Telford · First-floor extensions across Shropshire

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Telford.