First-floor extensions in Thame

What we'd confirm first for a project in Thame.

Postcode districts: OX9 and OX39
County / area: Oxfordshire, England
Price region: South East England
Guide price: £27,500–£40,000 (£1,980–£2,860 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Aylesbury (8.4 miles), Cowley (9.9 miles), Oxford (12 miles)
Distance to Oxford: about 12 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

Thame sits about 12.0 miles from Oxford. Closer to home, Aylesbury is 8.4 miles away and Cowley 9.9 miles.

What it costs in Thame

A guide price for Thame: around £27,500–£40,000 for 4 m × 3.5 m of new first-floor space (14 m²). That works out at £1,980–£2,860 per m² of new floor space, including VAT at 20%. Steelwork for wide openings is the item most likely to move the figure; we'll know once the engineer has designed it.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,820–£2,630 per m²	£25,500–£37,000
Standard	£1,980–£2,860 per m²	£27,500–£40,000
Premium	£2,380–£3,430 per m²	£33,500–£48,000

Planning and building regulations in Thame

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Thame homes

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

How we'd run your project

Visit and first ideas
One of our team visits your house in Thame, checks the walls, roof and drains, and sketches out options with you.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Thame.
Structure and building control
A structural engineer sizes the foundations and steels, and we get building regulations approval before work starts.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about first-floor extensions in Thame

Which postcodes do you cover around Thame?

We cover Thame (OX9 and OX39) and nearby places including Aylesbury, Cowley and Oxford, plus the rest of Oxfordshire. The first site visit is free.

Who handles building regulations for a project in Thame?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does a first-floor extension cost in Thame?

Our guide for South East England, which covers Thame, is £1,980–£2,860 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £27,500–£40,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

Nearby towns we cover for first-floor extensions:

Other extensions in Thame

All two-storey extension services in Thame · First-floor extensions across Oxfordshire

The quickest next step is a visit. We'll look at your house in Thame and give you an honest view of the options.