Part single, part two-storey extensions in Thame

The basics for Thame at a glance.

Postcode districts: OX9 and OX39
County / area: Oxfordshire, England
Price region: South East England
Guide price: £79,000–£109,000 (£2,200–£3,030 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Aylesbury (8.4 miles), Cowley (9.9 miles), Oxford (12 miles)
Distance to Oxford: about 12 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

We cover Thame (OX9 and OX39) and the places around it, including Aylesbury (8.4 miles), Cowley (9.9 miles) and Oxford.

What it costs in Thame

Expect a part single, part two-storey extension in Thame to land somewhere around £79,000–£109,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). Our South East England guide rate is £2,200–£3,030 per m², including VAT. Professional fees for drawings and the structural engineer are listed separately on our prices page.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£2,020–£2,780 per m²	£73,000–£100,000
Standard	£2,200–£3,030 per m²	£79,000–£109,000
Premium	£2,640–£3,630 per m²	£95,000–£130,500

Planning and building regulations in Thame

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Thame homes

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

Light into the kitchen

The single-storey part is the place for roof lights or a lantern, which bring daylight deep into the plan. In England, glazing is normally limited to 25% of the new floor area plus any windows removed, unless calculations show the house still performs, so we plan the balance early.

How we'd run your project

Free site visit
We visit your home in Thame, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Get it approved
Once you're happy with the design we submit it to the council for Thame and deal with any questions from the planning officer.
Engineer it
Foundations sized for two floors, steels for any openings, and building control approval, all before anyone starts on site.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about part single, part two-storey extensions in Thame

How much does a part single, part two-storey extension cost in Thame?

Our guide for South East England, which covers Thame, is £2,200–£3,030 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £79,000–£109,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which postcodes do you cover around Thame?

We cover Thame (OX9 and OX39) and nearby places including Aylesbury, Cowley and Oxford, plus the rest of Oxfordshire. The first site visit is free.

Do I need planning permission for a part single, part two-storey extension in Thame?

Thame is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Can I add roof lights to the single-storey part?

Yes. Roof lights or a lantern over the single-storey part are one of the main reasons to choose this design, as they light the middle of a deep kitchen. In England they count towards the Part L glazing allowance, normally 25% of the new floor area plus windows removed, so we balance them with the rear doors.

Nearby

We also cover places near Thame, including:

Other extensions in Thame

All two-storey extension services in Thame · Part single, part two-storey extensions across Oxfordshire

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.