Part single, part two-storey extensions in Batley

Quick reference for homeowners in Batley.

Postcode districts: WF17
County / area: West Yorkshire, England
Price region: Yorkshire and the Humber
Guide price: £66,000–£91,000 (£1,840–£2,530 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Dewsbury (0.9 miles), Heckmondwike (1.8 miles), Liversedge (2.4 miles)
Distance to Leeds: about 7.4 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

Around Batley we also work in Dewsbury, Heckmondwike and Liversedge, and across the rest of West Yorkshire. Postcode district in and near Batley: WF17.

What it costs in Batley

Using our Yorkshire and the Humber rates, a part single, part two-storey extension with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £66,000–£91,000, including VAT. Bigger or more glazed designs cost more per m². We'll give you a written design-stage price first, then a fixed build price once the drawings are agreed.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,690–£2,330 per m²	£61,000–£84,000
Standard	£1,840–£2,530 per m²	£66,000–£91,000
Premium	£2,210–£3,040 per m²	£79,500–£109,500

Planning and building regulations in Batley

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Batley homes

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

Light into the kitchen

The single-storey part is the place for roof lights or a lantern, which bring daylight deep into the plan. In England, glazing is normally limited to 25% of the new floor area plus any windows removed, unless calculations show the house still performs, so we plan the balance early.

How we'd run your project

Visit and first ideas
One of our team visits your house in Batley, checks the walls, roof and drains, and sketches out options with you.
Get it approved
Once you're happy with the design we submit it to the council for Batley and deal with any questions from the planning officer.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about part single, part two-storey extensions in Batley

Which postcodes do you cover around Batley?

We cover Batley (WF17) and nearby places including Dewsbury, Heckmondwike and Liversedge, plus the rest of West Yorkshire. The first site visit is free.

Who handles building regulations for a project in Batley?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does a part single, part two-storey extension cost in Batley?

Our guide for Yorkshire and the Humber, which covers Batley, is £1,840–£2,530 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £66,000–£91,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Nearby

Close to Batley? We work across the area, including:

Other extensions in Batley

All two-storey extension services in Batley · Part single, part two-storey extensions across West Yorkshire

Book a free site visit in Batley and we'll tell you what's possible, what approvals you need and what the design stage would cost.