Part single, part two-storey extensions in Battersea

Before you start in Battersea, here's what applies.

Postcode districts: SW11
County / area: Greater London, England
Price region: London
Guide price: £86,500–£119,000 (£2,400–£3,300 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Chelsea (1.1 miles), Clapham (1.2 miles), Pimlico (1.3 miles)
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

We cover Battersea (SW11) and the places around it, including Chelsea (1.1 miles), Clapham (1.2 miles) and Pimlico.

What it costs in Battersea

Most of the cost of a part single, part two-storey extension is set by its size and specification. For Battersea and the rest of London, our guide is £2,400–£3,300 per m² including VAT, so about £86,500–£119,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). Keep a contingency of around 10% for things nobody can see until the ground is opened up.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£2,210–£3,040 per m²	£79,500–£109,500
Standard	£2,400–£3,300 per m²	£86,500–£119,000
Premium	£2,880–£3,960 per m²	£103,500–£142,500

Planning and building regulations in Battersea

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Battersea homes

Where to put the two-storey part

The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

How we'd run your project

Visit and first ideas
One of our team visits your house in Battersea, checks the walls, roof and drains, and sketches out options with you.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Battersea.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.

Questions about part single, part two-storey extensions in Battersea

Who handles building regulations for a project in Battersea?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Battersea?

We cover Battersea (SW11) and nearby places including Chelsea, Clapham and Pimlico, plus the rest of Greater London. The first site visit is free.

How much does a part single, part two-storey extension cost in Battersea?

Our guide for London, which covers Battersea, is £2,400–£3,300 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £86,500–£119,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Can I add roof lights to the single-storey part?

Yes. Roof lights or a lantern over the single-storey part are one of the main reasons to choose this design, as they light the middle of a deep kitchen. In England they count towards the Part L glazing allowance, normally 25% of the new floor area plus windows removed, so we balance them with the rear doors.

Nearby

The same service in neighbouring towns:

Other extensions in Battersea

All two-storey extension services in Battersea · Part single, part two-storey extensions across Greater London

The quickest next step is a visit. We'll look at your house in Battersea and give you an honest view of the options.