First-floor extensions in Battersea

Quick reference for homeowners in Battersea.

Postcode districts: SW11
County / area: Greater London, England
Price region: London
Guide price: £30,000–£43,500 (£2,160–£3,120 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Chelsea (1.1 miles), Clapham (1.2 miles), Pimlico (1.3 miles)
First visit: Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

Around Battersea we also work in Chelsea, Clapham and Pimlico, and across the rest of Greater London. Postcode district in and near Battersea: SW11.

What it costs in Battersea

For budgeting in Battersea, allow around £30,000–£43,500 for a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²). That's based on £2,160–£3,120 per m² including VAT for London. Professional fees for drawings and the structural engineer are listed separately on our prices page.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,990–£2,870 per m²	£28,000–£40,000
Standard	£2,160–£3,120 per m²	£30,000–£43,500
Premium	£2,590–£3,740 per m²	£36,500–£52,500

Planning and building regulations in Battersea

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Battersea homes

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

Matching the roofline

A first-floor extension often changes how the back or side of the house looks more than the original single storey did. Matching the main roof pitch and materials, and keeping the ridge below the main ridge, usually gives the best result and is expected for permitted development in England.

How we'd run your project

Look at the house
We start in Battersea with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Structure and building control
A structural engineer sizes the foundations and steels, and we get building regulations approval before work starts.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about first-floor extensions in Battersea

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

How much does a first-floor extension cost in Battersea?

Our guide for London, which covers Battersea, is £2,160–£3,120 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £30,000–£43,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Do I need planning permission for a first-floor extension in Battersea?

Battersea is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Nearby

Nearby towns we cover for first-floor extensions:

Other extensions in Battersea

All two-storey extension services in Battersea · First-floor extensions across Greater London

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.