Part single, part two-storey extensions in Cupar

Before you start in Cupar, here's what applies.

Postcode districts: KY15
County / area: Fife, Scotland
Price region: Scotland
Guide price: £67,500–£93,000 (£1,880–£2,580 per m²)
Approval route: Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
Nearest towns: Leven (8.2 miles), St Andrews (8.3 miles), Methil (9.2 miles)
Distance to Dunfermline: about 24.2 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.

Cupar sits about 24.2 miles from Dunfermline. Closer to home, Leven is 8.2 miles away and St Andrews 8.3 miles.

What it costs in Cupar

Expect a part single, part two-storey extension in Cupar to land somewhere around £67,500–£93,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). Our Scotland guide rate is £1,880–£2,580 per m², including VAT. Kitchens, bathroom fittings and flooring are priced separately so you can compare like with like.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,730–£2,380 per m²	£62,500–£85,500
Standard	£1,880–£2,580 per m²	£67,500–£93,000
Premium	£2,260–£3,100 per m²	£81,000–£111,500

Planning and building standards in Cupar

In Scotland, because part of the extension is more than one storey, it is assessed under Class 1B, which needs at least 10 m to every boundary for permitted development. On most plots that is not possible, so the extension needs a householder application (£371, decided within two months). A building warrant is also needed before any work starts.

Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.

Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.

Design points for Cupar homes

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

Where to put the two-storey part

The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.

How we'd run your project

Free site visit
We visit your home in Cupar, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about part single, part two-storey extensions in Cupar

Which postcodes do you cover around Cupar?

We cover Cupar (KY15) and nearby places including Leven, St Andrews and Methil, plus the rest of Fife. The first site visit is free.

Do I need planning permission for a part single, part two-storey extension in Cupar?

Cupar is in Scotland. Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.

How much does a part single, part two-storey extension cost in Cupar?

Our guide for Scotland, which covers Cupar, is £1,880–£2,580 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £67,500–£93,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Nearby

The same service in neighbouring towns:

Other extensions in Cupar

All two-storey extension services in Cupar · Part single, part two-storey extensions across Fife

Tell us about your house in Cupar and we'll call you back to arrange a free, no-obligation visit.