Two-storey wraparound extensions in Cupar

Cupar: the key facts for this kind of project.

Postcode districts: KY15
County / area: Fife, Scotland
Price region: Scotland
Guide price: £113,000–£155,500 (£2,020–£2,770 per m²)
Approval route: Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
Nearest towns: Leven (8.2 miles), St Andrews (8.3 miles), Methil (9.2 miles)
Distance to Dunfermline: about 24.2 miles
First visit: Free, no obligation

About a two-storey wraparound extension

A two-storey wraparound extension is an L-shaped addition that extends both the side and the rear of your house, on two floors. It gives one of the largest gains in floor space of any extension, typically a big open-plan kitchen and living area below and two or more bedrooms or bathrooms above.

We cover Cupar (KY15) and the places around it, including Leven (8.2 miles), St Andrews (8.3 miles) and Methil.

What it costs in Cupar

Most of the cost of a two-storey wraparound extension is set by its size and specification. For Cupar and the rest of Scotland, our guide is £2,020–£2,770 per m² including VAT, so about £113,000–£155,500 for an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space). These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.

Spec	Per m²	An L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space)
Essential	£1,860–£2,550 per m²	£104,000–£143,000
Standard	£2,020–£2,770 per m²	£113,000–£155,500
Premium	£2,430–£3,330 per m²	£136,000–£186,500

Planning and building standards in Cupar

In Scotland, a two-storey wraparound would need to be at least 10 m from every boundary to be permitted development under Class 1B, and not on an elevation fronting a road. That is rarely possible, so plan for a householder planning application, which costs £371 and is decided within two months, followed by a building warrant before work starts.

Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.

Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.

Design points for Cupar homes

Two roofs that meet

A wraparound needs the side roof and rear roof to join cleanly, often with a valley or hip where they meet. Getting pitches and ridge heights right keeps rainwater moving and avoids a bulky mass at the back corner, which neighbours and planners notice.

The corner post

At the outside corner of the L, there is no existing wall to carry the floor above. Opening the ground floor fully usually means a steel frame or a corner post, and the engineer's design sets how slim it can be. We decide early whether you want a clear corner or a visible post.

How we'd run your project

Visit and first ideas
One of our team visits your house in Cupar, checks the walls, roof and drains, and sketches out options with you.
Design and approvals
We draw the extension and check it against the rules for Scotland, then apply for planning permission or a certificate of lawfulness, whichever fits.
Structure and building standards
A structural engineer sizes the foundations and steels, and we get a building warrant before work starts.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about two-storey wraparound extensions in Cupar

Do I need planning permission for a two-storey wraparound extension in Cupar?

Cupar is in Scotland. Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.

Who handles building standards for a project in Cupar?

We handle it as part of the project. What's needed in Scotland: a building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does a two-storey wraparound extension cost in Cupar?

Our guide for Scotland, which covers Cupar, is £2,020–£2,770 per m² including VAT. A typical project with an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space) comes to about £113,000–£155,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

How much floor space does a wraparound extension add?

It depends on the width of the side plot and the depth at the rear. Our guide prices are based on a typical wraparound with an L-shaped footprint of about 28 m² wrapping the side and rear, on two floors (56 m² of new floor space). Yours may be larger or smaller, and the measured survey shows what your plot can take.

Can a wraparound extension be part single, part two-storey?

Yes. Many wraparounds keep the rear part single storey with roof lights over the kitchen and put the two-storey part to the side. This can reduce the effect on neighbours and the cost. We set out both options at the design stage, so you can compare floor space against price before choosing.

Nearby

The same service in neighbouring towns:

Other extensions in Cupar

All two-storey extension services in Cupar · Two-storey wraparound extensions across Fife

Want a figure first? Try our guide price tool, then book a free visit to firm it up.