Part single, part two-storey extensions in Dalton-in-Furness

Dalton-in-Furness: the key facts for this kind of project.

Postcode districts: LA15
County / area: Cumbria, England
Price region: North West England
Guide price: £68,500–£94,000 (£1,900–£2,610 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Askam-in-Furness (2.3 miles), Barrow-in-Furness (3.8 miles), Ulverston (4.3 miles)
Distance to Carlisle: about 51.8 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

Around Dalton-in-Furness we also work in Askam-in-Furness, Barrow-in-Furness and Ulverston, and across the rest of Cumbria. Postcode district in and near Dalton-in-Furness: LA15.

What it costs in Dalton-in-Furness

Our guide for North West England is £1,900–£2,610 per m² including VAT. On a project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total), that puts a part single, part two-storey extension in Dalton-in-Furness at roughly £68,500–£94,000. Professional fees for drawings and the structural engineer are listed separately on our prices page.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,750–£2,400 per m²	£63,000–£86,500
Standard	£1,900–£2,610 per m²	£68,500–£94,000
Premium	£2,280–£3,130 per m²	£82,000–£113,000

Planning and building regulations in Dalton-in-Furness

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Dalton-in-Furness homes

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

Light into the kitchen

The single-storey part is the place for roof lights or a lantern, which bring daylight deep into the plan. In England, glazing is normally limited to 25% of the new floor area plus any windows removed, unless calculations show the house still performs, so we plan the balance early.

How we'd run your project

Measure and listen
A visit to Dalton-in-Furness to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about part single, part two-storey extensions in Dalton-in-Furness

Which postcodes do you cover around Dalton-in-Furness?

We cover Dalton-in-Furness (LA15) and nearby places including Askam-in-Furness, Barrow-in-Furness and Ulverston, plus the rest of Cumbria. The first site visit is free.

How much does a part single, part two-storey extension cost in Dalton-in-Furness?

Our guide for North West England, which covers Dalton-in-Furness, is £1,900–£2,610 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £68,500–£94,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Do I need planning permission for a part single, part two-storey extension in Dalton-in-Furness?

Dalton-in-Furness is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Nearby

The same service in neighbouring towns:

Other extensions in Dalton-in-Furness

All two-storey extension services in Dalton-in-Furness · Part single, part two-storey extensions across Cumbria

Want a figure first? Try our guide price tool, then book a free visit to firm it up.