Part single, part two-storey extensions in Ulverston

Ulverston: the key facts for this kind of project.

Postcode districts: LA12
County / area: Cumbria, England
Price region: North West England
Guide price: £68,500–£94,000 (£1,900–£2,610 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Dalton-in-Furness (4.3 miles), Askam-in-Furness (4.4 miles), Grange-over-Sands (7 miles)
Distance to Carlisle: about 48.7 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.

We cover postcode district LA12 in and around Ulverston, along with neighbouring Dalton-in-Furness, Askam-in-Furness and Grange-over-Sands.

What it costs in Ulverston

Guide prices for part single, part two-storey extensions in North West England are around £1,900–£2,610 per m² of new floor space, including VAT. For a typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total), that's roughly £68,500–£94,000. Professional fees for drawings and the structural engineer are listed separately on our prices page.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,750–£2,400 per m²	£63,000–£86,500
Standard	£1,900–£2,610 per m²	£68,500–£94,000
Premium	£2,280–£3,130 per m²	£82,000–£113,000

Planning and building regulations in Ulverston

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Ulverston homes

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

How we'd run your project

Measure and listen
A visit to Ulverston to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in England before drawing in detail.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.

Questions about part single, part two-storey extensions in Ulverston

Which postcodes do you cover around Ulverston?

We cover Ulverston (LA12) and nearby places including Dalton-in-Furness, Askam-in-Furness and Grange-over-Sands, plus the rest of Cumbria. The first site visit is free.

How much does a part single, part two-storey extension cost in Ulverston?

Our guide for North West England, which covers Ulverston, is £1,900–£2,610 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £68,500–£94,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can I add roof lights to the single-storey part?

Yes. Roof lights or a lantern over the single-storey part are one of the main reasons to choose this design, as they light the middle of a deep kitchen. In England they count towards the Part L glazing allowance, normally 25% of the new floor area plus windows removed, so we balance them with the rear doors.

Nearby

Nearby towns we cover for part single, part two-storey extensions:

Other extensions in Ulverston

All two-storey extension services in Ulverston · Part single, part two-storey extensions across Cumbria

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Ulverston.