Part single, part two-storey extensions in Morecambe

Useful details for planning a part single, part two-storey extension in Morecambe.

Postcode districts: LA4 and LA5
County / area: Lancashire, England
Price region: North West England
Guide price: £68,500–£94,000 (£1,900–£2,610 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Heysham (2.1 miles), Lancaster (2.9 miles), Grange-over-Sands (8.5 miles)
Distance to Preston: about 22.1 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.

We cover Morecambe (LA4 and LA5) and the places around it, including Heysham (2.1 miles), Lancaster (2.9 miles) and Grange-over-Sands.

What it costs in Morecambe

A guide price for Morecambe: around £68,500–£94,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). That works out at £1,900–£2,610 per m² of new floor space, including VAT at 20%. Keep a contingency of around 10% for things nobody can see until the ground is opened up.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,750–£2,400 per m²	£63,000–£86,500
Standard	£1,900–£2,610 per m²	£68,500–£94,000
Premium	£2,280–£3,130 per m²	£82,000–£113,000

Planning and building regulations in Morecambe

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Morecambe homes

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

Light into the kitchen

The single-storey part is the place for roof lights or a lantern, which bring daylight deep into the plan. In England, glazing is normally limited to 25% of the new floor area plus any windows removed, unless calculations show the house still performs, so we plan the balance early.

How we'd run your project

Free site visit
We visit your home in Morecambe, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in England before drawing in detail.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Build
Foundations, walls, floor, roof, windows, then first and second fix. We break through into the house as late as we can.

Questions about part single, part two-storey extensions in Morecambe

Do I need planning permission for a part single, part two-storey extension in Morecambe?

Morecambe is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Which postcodes do you cover around Morecambe?

We cover Morecambe (LA4 and LA5) and nearby places including Heysham, Lancaster and Grange-over-Sands, plus the rest of Lancashire. The first site visit is free.

How much does a part single, part two-storey extension cost in Morecambe?

Our guide for North West England, which covers Morecambe, is £1,900–£2,610 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £68,500–£94,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Nearby

The same service in neighbouring towns:

Other extensions in Morecambe

All two-storey extension services in Morecambe · Part single, part two-storey extensions across Lancashire

Book a free site visit in Morecambe and we'll tell you what's possible, what approvals you need and what the design stage would cost.