Part single, part two-storey extensions in Elgin

Elgin: the key facts for this kind of project.

Postcode districts: IV30
County / area: The Highlands, Moray and Islands, Scotland
Price region: Scotland
Guide price: £67,500–£93,000 (£1,880–£2,580 per m²)
Approval route: Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
Nearest towns: Lossiemouth (5.1 miles), Forres (11.5 miles), Buckie (13.3 miles)
Distance to Inverness: about 35.6 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, a building warrant and the build, carried out by vetted teams working under S&K.

Around Elgin we also work in Lossiemouth, Forres and Buckie, and across the rest of the Highlands, Moray and Islands. Postcode district in and near Elgin: IV30.

What it costs in Elgin

Most of the cost of a part single, part two-storey extension is set by its size and specification. For Elgin and the rest of Scotland, our guide is £1,880–£2,580 per m² including VAT, so about £67,500–£93,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). Professional fees for drawings and the structural engineer are listed separately on our prices page.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,730–£2,380 per m²	£62,500–£85,500
Standard	£1,880–£2,580 per m²	£67,500–£93,000
Premium	£2,260–£3,100 per m²	£81,000–£111,500

Planning and building standards in Elgin

In Scotland, because part of the extension is more than one storey, it is assessed under Class 1B, which needs at least 10 m to every boundary for permitted development. On most plots that is not possible, so the extension needs a householder application (£371, decided within two months). A building warrant is also needed before any work starts.

Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.

Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.

Design points for Elgin homes

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

How we'd run your project

Start at your house
We come to your home in Elgin, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in Scotland before drawing in detail.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the completion certificate at the end.

Questions about part single, part two-storey extensions in Elgin

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils have two months to decide a local planning application), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Who handles building standards for a project in Elgin?

We handle it as part of the project. What's needed in Scotland: a building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does a part single, part two-storey extension cost in Elgin?

Our guide for Scotland, which covers Elgin, is £1,880–£2,580 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £67,500–£93,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Nearby

Other towns near Elgin:

Other extensions in Elgin

All two-storey extension services in Elgin · Part single, part two-storey extensions across the Highlands, Moray and Islands

Want a figure first? Try our guide price tool, then book a free visit to firm it up.