Part single, part two-storey extensions in Forres
A part single, part two-storey extension is one of the most space-efficient ways to add bedrooms and living space to a house in Forres, because the new floors share one set of foundations and one roof.
The basics for Forres at a glance.
- Postcode districts
- IV36
- County / area
- The Highlands, Moray and Islands, Scotland
- Price region
- Scotland
- Guide price
- £67,500–£93,000 (£1,880–£2,580 per m²)
- Approval route
- Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
- Nearest towns
- Nairn (9.8 miles), Elgin (11.5 miles), Lossiemouth (14.7 miles)
- Distance to Inverness
- about 24.1 miles
- First visit
- Free, no obligation
About a part single, part two-storey extension
A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.
We cover postcode district IV36 in and around Forres, along with neighbouring Nairn, Elgin and Lossiemouth.
What it costs in Forres
Most of the cost of a part single, part two-storey extension is set by its size and specification. For Forres and the rest of Scotland, our guide is £1,880–£2,580 per m² including VAT, so about £67,500–£93,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.
| Spec | Per m² | A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) |
|---|---|---|
| Essential | £1,730–£2,380 per m² | £62,500–£85,500 |
| Standard | £1,880–£2,580 per m² | £67,500–£93,000 |
| Premium | £2,260–£3,100 per m² | £81,000–£111,500 |
Planning and building standards in Forres
In Scotland, because part of the extension is more than one storey, it is assessed under Class 1B, which needs at least 10 m to every boundary for permitted development. On most plots that is not possible, so the extension needs a householder application (£371, decided within two months). A building warrant is also needed before any work starts.
Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.
Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.
Design points for Forres homes
Where to put the two-storey part
The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.
The roof junction
Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.
How we'd run your project
Look at the house
We start in Forres with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Design and approvals
We draw the extension and check it against the rules for Scotland, then apply for planning permission or a certificate of lawfulness, whichever fits.
Structure and building standards
A structural engineer sizes the foundations and steels, and we get a building warrant before work starts.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.
Questions about part single, part two-storey extensions in Forres
How much does a part single, part two-storey extension cost in Forres?
Our guide for Scotland, which covers Forres, is £1,880–£2,580 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £67,500–£93,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
Which postcodes do you cover around Forres?
We cover Forres (IV36) and nearby places including Nairn, Elgin and Lossiemouth, plus the rest of the Highlands, Moray and Islands. The first site visit is free.
How long does a part single, part two-storey extension take?
Allow 4 to 8 weeks for survey and design, then the approval period (councils have two months to decide a local planning application), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.
Can the single-storey part be deeper than the two-storey part?
With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.
Which side should the two-storey part go on?
Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.
Nearby
We also cover places near Forres, including:
Other extensions in Forres
- Rear
- Side
- Wraparound
- Over a garage
- First floor
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Forres · Part single, part two-storey extensions across the Highlands, Moray and Islands
Book a free site visit in Forres and we'll tell you what's possible, what approvals you need and what the design stage would cost.