Part single, part two-storey extensions in Guisborough

Useful details for planning a part single, part two-storey extension in Guisborough.

Postcode districts: TS12, TS13 and TS14
County / area: North Yorkshire, England
Price region: Yorkshire and the Humber
Guide price: £66,000–£91,000 (£1,840–£2,530 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Redcar (5.7 miles), Ingleby Greenhow (6.2 miles), Middlesbrough (7.7 miles)
Distance to York: about 39.9 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.

We cover postcode districts TS12, TS13 and TS14 in and around Guisborough, along with neighbouring Redcar, Ingleby Greenhow and Middlesbrough.

What it costs in Guisborough

Our guide for Yorkshire and the Humber is £1,840–£2,530 per m² including VAT. On a project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total), that puts a part single, part two-storey extension in Guisborough at roughly £66,000–£91,000. Keep a contingency of around 10% for things nobody can see until the ground is opened up.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,690–£2,330 per m²	£61,000–£84,000
Standard	£1,840–£2,530 per m²	£66,000–£91,000
Premium	£2,210–£3,040 per m²	£79,500–£109,500

Planning and building regulations in Guisborough

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Guisborough homes

Where to put the two-storey part

The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

How we'd run your project

Start at your house
We come to your home in Guisborough, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in England before drawing in detail.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about part single, part two-storey extensions in Guisborough

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which postcodes do you cover around Guisborough?

We cover Guisborough (TS12, TS13 and TS14) and nearby places including Redcar, Ingleby Greenhow and Middlesbrough, plus the rest of North Yorkshire. The first site visit is free.

How much does a part single, part two-storey extension cost in Guisborough?

Our guide for Yorkshire and the Humber, which covers Guisborough, is £1,840–£2,530 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £66,000–£91,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Nearby

The same service in neighbouring towns:

Other extensions in Guisborough

All two-storey extension services in Guisborough · Part single, part two-storey extensions across North Yorkshire

Book a free site visit in Guisborough and we'll tell you what's possible, what approvals you need and what the design stage would cost.