Part single, part two-storey extensions in Hale Barns

Before you start in Hale Barns, here's what applies.

Postcode districts: M90
County / area: Greater Manchester, England
Price region: North West England
Guide price: £68,500–£94,000 (£1,900–£2,610 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Hale (Greater Manchester) (1 mile), Altrincham (1.9 miles), Timperley (2.3 miles)
Distance to Manchester: about 8.3 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

We cover postcode district M90 in and around Hale Barns, along with neighbouring Hale (Greater Manchester), Altrincham and Timperley.

What it costs in Hale Barns

Our guide for North West England is £1,900–£2,610 per m² including VAT. On a project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total), that puts a part single, part two-storey extension in Hale Barns at roughly £68,500–£94,000. These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,750–£2,400 per m²	£63,000–£86,500
Standard	£1,900–£2,610 per m²	£68,500–£94,000
Premium	£2,280–£3,130 per m²	£82,000–£113,000

Planning and building regulations in Hale Barns

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Hale Barns homes

Light into the kitchen

The single-storey part is the place for roof lights or a lantern, which bring daylight deep into the plan. In England, glazing is normally limited to 25% of the new floor area plus any windows removed, unless calculations show the house still performs, so we plan the balance early.

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

How we'd run your project

Free site visit
We visit your home in Hale Barns, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about part single, part two-storey extensions in Hale Barns

Who handles building regulations for a project in Hale Barns?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Hale Barns?

We cover Hale Barns (M90) and nearby places including Hale (Greater Manchester), Altrincham and Timperley, plus the rest of Greater Manchester. The first site visit is free.

How much does a part single, part two-storey extension cost in Hale Barns?

Our guide for North West England, which covers Hale Barns, is £1,900–£2,610 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £68,500–£94,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Can I add roof lights to the single-storey part?

Yes. Roof lights or a lantern over the single-storey part are one of the main reasons to choose this design, as they light the middle of a deep kitchen. In England they count towards the Part L glazing allowance, normally 25% of the new floor area plus windows removed, so we balance them with the rear doors.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Nearby

The same service in neighbouring towns:

Other extensions in Hale Barns

All two-storey extension services in Hale Barns · Part single, part two-storey extensions across Greater Manchester

Book a free site visit in Hale Barns and we'll tell you what's possible, what approvals you need and what the design stage would cost.