Part single, part two-storey extensions in Matlock

The basics for Matlock at a glance.

Postcode districts: DE4 and DE45
County / area: Derbyshire, England
Price region: East Midlands
Guide price: £70,500–£97,000 (£1,960–£2,700 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Alfreton (7.7 miles), Belper (8.5 miles), Chesterfield (9.6 miles)
Distance to Derby: about 15.3 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

We cover postcode districts DE4 and DE45 in and around Matlock, along with neighbouring Alfreton, Belper and Chesterfield.

What it costs in Matlock

For budgeting in Matlock, allow around £70,500–£97,000 for a part single, part two-storey extension with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). That's based on £1,960–£2,700 per m² including VAT for the East Midlands. Keep a contingency of around 10% for things nobody can see until the ground is opened up.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,800–£2,480 per m²	£65,000–£89,500
Standard	£1,960–£2,700 per m²	£70,500–£97,000
Premium	£2,350–£3,230 per m²	£84,500–£116,500

Planning and building regulations in Matlock

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Matlock homes

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

Light into the kitchen

The single-storey part is the place for roof lights or a lantern, which bring daylight deep into the plan. In England, glazing is normally limited to 25% of the new floor area plus any windows removed, unless calculations show the house still performs, so we plan the balance early.

How we'd run your project

Start at your house
We come to your home in Matlock, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in England before drawing in detail.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about part single, part two-storey extensions in Matlock

Which postcodes do you cover around Matlock?

We cover Matlock (DE4 and DE45) and nearby places including Alfreton, Belper and Chesterfield, plus the rest of Derbyshire. The first site visit is free.

Who handles building regulations for a project in Matlock?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can I add roof lights to the single-storey part?

Yes. Roof lights or a lantern over the single-storey part are one of the main reasons to choose this design, as they light the middle of a deep kitchen. In England they count towards the Part L glazing allowance, normally 25% of the new floor area plus windows removed, so we balance them with the rear doors.

Nearby

We also cover places near Matlock, including:

Other extensions in Matlock

All two-storey extension services in Matlock · Part single, part two-storey extensions across Derbyshire

Book a free site visit in Matlock and we'll tell you what's possible, what approvals you need and what the design stage would cost.